Post your latest Purchase

M

Mario

Ambassador of Buzz
MegaMind said:
tat video is of CM 690 II... Still not sure it fits in gamma..
Click to expand...

My bad, is that a 690 II? Need to get my eyes tested!

Anyway, go over to utube and check the comments in the video...there's another user who has commented that he fit the D14 in his Gamma!
 
d3p

d3p

PowerHouse
Gamma can't handle a D14.

Here is an example. the guy here uses a HAF912.

*img859.imageshack.us/img859/7730/img0487.jpg

Gamma : 190 X 449 X 508 mm (W, H, D)

Now look at the pic once again, gamma is smaller than 912, same way D14 can't fit w.r.t to the height.
 
Last edited:
Skud

Skud

Super Moderator
Staff member
d3p5kor said:
Gamma can't handle a D14.

Here is an example. the guy here uses a Lian Li K62.

*img859.imageshack.us/img859/7730/img0487.jpg

Dimensions of Lian Li K62: 214mm x 496mm x 498 mm (W, H, D)*

Gamma : 190 X 449 X 508 mm (W, H, D)

Now look at the pic once again, gamma is smaller than K62, same way D14 can't fit w.r.t to the height.
Click to expand...


d3p5kor, the picture you have given is not of a K62, in all probability its the CM HAF 912 adv. ;)

And here's the Noctua D14 specs:-

Socket compatibility Intel LGA1366, LGA1156, LGA1155, LGA775 & AMD AM2, AM2+, AM3 (backplate required)
Height (without fan) 160 mm
Width (without fan) 140 mm
Depth (without fan) 130 mm
Height (with fan) 160 mm
Width (with fan) 140 mm
Depth (with fan) 158 mm
Weight (without fan) 900 g
Weight (with fan) 1070/1240* g
Material Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Fan compatibility 140x140x25 & 120x120x25mm
Scope of Delivery
1x NF-P14 premium fan
1x NF-P12 premium fan
2x Ultra-Low-Noise Adaptor (U.L.N.A.)
Y-Split Cable
4x Vibration-Compensators (for using NF-P12 as case fan)
4x Fan screws (for using NF-P12 as case fan)
NT-H1 high-grade thermal compound
SecuFirm2™ Mounting Kits
Noctua Metal Case-Badge
Warranty 6 Years
Click to expand...

So with 160mm height it should fit in most of the cases.
 
asingh

asingh

Aspiring Novelist
Anyone getting the NHD14 should measure the width of the cabinet. It should be > 160mm. But do note, that the motherboard is on spacers so some depth will be eaten away. And the socket area also has a thickness. Around 215mm should be minimal.
 
S_V

S_V

In the zone
NHD14 with Gamma Barely Fits and Like Anil said.. If motherboard design or layout occupies the valuable space then NHD14 is little tough...
(I don't know who and What config is the discussion about..) these are my general idea
Also With X58 Chipset NHD14 will not fit becoz to use Triple Channel RAM's one side FAN attached to DH14 must be raised and that makes side door impossible to close unless Low profile RAMs used...

Gamma and NH DH-14 is really BAD combination...
 
MegaMind

MegaMind

Human Spambot
S_V said:
NHD14 with Gamma Barely Fits and Like Anil said.. If motherboard design or layout occupies the valuable space then NHD14 is little tough...
(I don't know who and What config is the discussion about..) these are my general idea
Click to expand...

The config is
i5-2500K
P8Z68-V
RipjawsX
Nzxt Gamma
 
hellknight

hellknight

BSD init pwns System V
Just ordered these things from SMC International

Cooler Master Elite 430 with side window
Cooler Master Hyper TX3

This should be enough for my GTX 260 Sonic, 2 HDDs, 1 ODD & AMD Athlon II X4 640 procesor..
 
You must log in or register to reply here.
Top Bottom