Official OVERCLOCKKER'S

Status
Not open for further replies.
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Thnx...my Chronicels told u that already..although i hadn't checked the clock generator,PLL...so one last try with that..I just wanna increase from 3 GHz to what say 3.2 or 3.4GHz as 3.4GHz P4 performs 40% better than 2.8Ghz P4, so shud be similar here too

Am on ur procedures Amitash thnx..tomorrow I'll tell u what happens...


Rite beta shudn't try..nvr did last 8 yrs having owned a PC..but jus wanna once
 
C

Cool Joe

The Black Waltz
You've owned a PC for 8 years!!! And all this while, only until recently, you never even cared about tech?
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Well..this is my second PC in 8 years....actually I started to take interest in all this way bak in 2003 when this mag waz started(or waz it CHIP?)...

I've been onto it since then(I waz in class 5), but began experimenting on hardware 1 year earlier...and forum half a year earlier
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Well...I got the oftware again...searching for the PLL but havn't found it yet...Sheesh how clumsy I am
 
amitash

amitash

Intel OCer
Well...I got the oftware again...searching for the PLL but havn't found it yet...Sheesh how clumsy I am
Click to expand...
If u cant find the PLL then dont try it...i tried it liku u on te wrong PLL once and i had to reset CMOS for the comp to boot.
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
well..tht's wat happened..when i used SET fsb 1st time..i just increased fsb directly(din give damn to PLL thingy)

Then CMOS reset and it waz bak on....

Well..won't try then..safe side..I weant my PC to run till April nxt year at least
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Sorry...tht's y not trying to do it again...well..for now I'm better off suggesting and helping out others than helping myself to some OCing

Well..whaddya know..itz working..

Running 3.2GHz now hurray..
If I go beyond 3.26GHz, it becomes unstable.
 
Last edited:
C

Cool Joe

The Black Waltz
OCing on a budget:

XFX MG63Mi7159
Intel C2D E2180 (2.0 Ghz)

The above combo won't cost more than 6.2K. You can OC the proccy all the way upto 3.0 Ghz with stock cooling and without any increase in voltage. And since the board is based on the nvidia 630i chipset, you can go for any cheap value RAM. But the mobo doesn't support dual channel memory, and the awkward placement of the SATA ports means that it'll be impossible to mount long gfx cards on this mobo.
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Nice...read this in another thread by you only(i mean the post)

Here:
*valid.x86-secret.com/show_oc.php?id=429371

DUn see it as 3.014GHz, tht's cause Multiplier 14x, varies between 14-15k..when 15k, 3.246GHz
 
OP
comp@ddict

comp@ddict

EXIT: DATA Junkyard
Oh...u already mentioned
"The above combo won't cost more than 6.2K. You can OC the proccy all the way upto 3.0 Ghz with stock cooling and without any increase in voltage. And since the board is based on the nvidia 630i chipset, you can go for any cheap value RAM. But the mobo doesn't support dual channel memory, and the awkward placement of the SATA ports means that it'll be impossible to mount long gfx cards on this mobo."

In another thread..just waz reading that only..


Well, i know my OC is not far too gr8, but goes unstable beyond that...what to do
 
C

Cool Joe

The Black Waltz
^^LOL....
You on 333 mhz RAM??? Me on 400 Mhz RAM.... But since I've got an nVidia board, all that won't matter. But I won't OC my 1.8 Ghz Athlon because the temperatures are quite high right now. I've cleaned all the dust and tied up the cables. Still, the proccy temps are quite high. If I OC my proccy, it'll be highly unstable especially while gaming.
 
Status
Not open for further replies.
Top Bottom