- Status
MasterMinds
hell boy
lol underclocked to 1.45ghz now.....
when i try to go further the system would freeze with cream colored screen
naa
when i try to go further the system would freeze with cream colored screen
Last edited:
constantine
its quiet...too quiet....
if e2180 is really such a good budget overclocker then how come i dont get good speeds
the max i got was 2.5 ghz ,1000 fsb and 833 mhz ram
but it wasnt stable for long
so i jus keep it at 2.35ghz
i hav biostar gf7050 mobo
help plz and fast!!
the max i got was 2.5 ghz ,1000 fsb and 833 mhz ram
but it wasnt stable for long
so i jus keep it at 2.35ghz
i hav biostar gf7050 mobo
help plz and fast!!
OP
comp@ddict
EXIT: DATA Junkyard
2.5Gigs is quite okay.. Guys i'll be off for a while now. Hope u help maintain this thread!
OP
comp@ddict
EXIT: DATA Junkyard
^lol, thnx, jus came in once today...thnx again.!!^^^
Hello Gurus,
My rig is
CPU- E8400 3.0 GHz
MOBO- ASUS P5N-D (750i sli)
RAM- 2x2 GB G-skill DDR2 800 MHZ(4-4-4-12-2T@2.1v)
GFX- evga 8800 gt 512 superclocked (700/ 2000)
SMPS- coolermasters extremepower duo 600 W
Cabby- Zebronics PEACE having 2 fans on side 80 n 120. one rear 120 exhaust. 1 front 80 inlet. 1 top 80.
I hv heard this cpu can go up to 3.5-3.6 on stock. So i wana try overclock.
Pls instruct me step by step how to overclock my rig.
I hv tried to increase cpu fsb to overclock with ram linked but cant touch even 3.1 ghz. system freeze or blue screen. i think i hv to play with voltages.
Also tell me an accurate soft for reading temp. bcoz i hv installed realtemp, coretemp, asus pcprobe2. n all this are showing different temps. so on which i should rely? also temp from bios r right enough to be rely on?
Plz help me..........
My rig is
CPU- E8400 3.0 GHz
MOBO- ASUS P5N-D (750i sli)
RAM- 2x2 GB G-skill DDR2 800 MHZ(4-4-4-12-2T@2.1v)
GFX- evga 8800 gt 512 superclocked (700/ 2000)
SMPS- coolermasters extremepower duo 600 W
Cabby- Zebronics PEACE having 2 fans on side 80 n 120. one rear 120 exhaust. 1 front 80 inlet. 1 top 80.
I hv heard this cpu can go up to 3.5-3.6 on stock. So i wana try overclock.
Pls instruct me step by step how to overclock my rig.
I hv tried to increase cpu fsb to overclock with ram linked but cant touch even 3.1 ghz. system freeze or blue screen. i think i hv to play with voltages.
Also tell me an accurate soft for reading temp. bcoz i hv installed realtemp, coretemp, asus pcprobe2. n all this are showing different temps. so on which i should rely? also temp from bios r right enough to be rely on?
Plz help me..........
OP
comp@ddict
EXIT: DATA Junkyard
U can do unlinked RAM oCing on ur mobo, and that mite yield better results. As for OCing::
*www.thinkdigit.com/forum/showthread.php?t=96442
Read my first post.
*www.thinkdigit.com/forum/showthread.php?t=96442
Read my first post.
Hi friends, i'm using MSI P45 NEO motherboard with an e7200 procy overclocked to 3.5 ghz,
i want to change the splash screen when my mobo boots, my mobo is having an AMI bios, i tried everything as i can to change the splashscreen using AMITOOLS, i can successfully and a new jpeg file to the bios rom, the amiflash utility also says "flash successfull", but the problem is my mobo wont post anything after that, but using the recovery method i restored my bios now!!!!, Can any tell is there a way to change the splash screen in my mobo???????????
i want to change the splash screen when my mobo boots, my mobo is having an AMI bios, i tried everything as i can to change the splashscreen using AMITOOLS, i can successfully and a new jpeg file to the bios rom, the amiflash utility also says "flash successfull", but the problem is my mobo wont post anything after that, but using the recovery method i restored my bios now!!!!, Can any tell is there a way to change the splash screen in my mobo???????????
Last edited:
OP
comp@ddict
EXIT: DATA Junkyard
Sure
Hi friends, i'm using MSI P45 NEO motherboard with an e7200 procy overclocked to 3.5 ghz,
i want to change the splash screen when my mobo boots, my mobo is having an AMI bios, i tried everything as i can to change the splashscreen using AMITOOLS, i can successfully and a new jpeg file to the bios rom, the amiflash utility also says "flash successfull", but the problem is my mobo wont post anything after that, but using the recovery method i restored my bios now!!!!, Can any tell is there a way to change the splash screen in my mobo???????????
It's a lengthy proccess AFAIK, and ww.askvg.com might help. Are u sure u want it desperately?(kitna der tak splash screen dikhai deta hai waise bhi?)
Last edited:
Done whatever u said. But i cant go beyond 3.1ghz n on 3.1, my core temp as seen frm bios is around 66 c which i think is very high. Mobo temp remain round 50 c.
S o i think this is the problem, even on stock speed, temp is around 60.
wat could be reason of such high temp. I hv zebronics peace with 2 120 mm fan, side and rear, 3 80mm fan, front, top, side. Should i apply thermal paste on cpu?
I hv bought sys in may n i think assembler has not applied any thermal paste.
Any suggestion?
Feel very ashamed of me when i see people overclock e8400 upto 4 on stock cooler. even e7200 is overclocked upto 3.5 n i cant.........
amitash
Intel OCer
AFAIK when u are in the bios.. the cpu is under alot of load anywhere between 40-80% stress so you will see high temps there...boot inot windows and use coretemp to monitor temps
It shows my Q6600 temp as 43C whereas in coretemp its 31C idle and 47C load Overclocked
Last edited:
OP
comp@ddict
EXIT: DATA Junkyard
It's not ur fault, it depends... And ya, there's no way CPU will run widout the thermal paste DUDE
nvidia
-----ATi-----
^^DUDE the CPU can run without the Thermal Paste..Until it gets fried. its not like your computer wont boot if there is no thermal paste..
WTF ?
Last edited:
OP
comp@ddict
EXIT: DATA Junkyard
There r better ways of discussion dude and yes it'll boot, but wud u recommend any1 to use a comp pROCC widout thermal paste? I dun think so!
- Status