rahul.007
bORn To RIse....
for all yor overclocking doubts, go to this thread....
www.thinkdigit.com/forum/showthread.php?t=125535
Have a config in mind,suggest something if you have something better in mind.
- Status
for all yor overclocking doubts, go to this thread....
www.thinkdigit.com/forum/showthread.php?t=125535
coderunknown
Retired Forum Mod
nope. unlocking won't damage proccy or any other thing but maybe your mood,if it fails to unlock
better than coolermaster Extreme Power 550W
just turn ACC in bios to on/auto or whatever option is there. if you buying X2 & your Bios & ACC got option for unlocking individual cores, even better. you can unlock to X3 + L3. X4 + L3. or simply L3.
no tech of such kind. still no worry. the idle power of the ATI 5series so low, it won't impact hugely on electricity bill. just get a good rated PSU. 80%+. also Cool & Quite 3.0 will take care of your proccy. take WDC Green if you worry about HDD. lower voltage of ram. well, this should be enough.
Last edited:
Piyush
Lanaya
better check on its website
i dont think it will support
rahul.007
bORn To RIse....
you mean MSI 785G E53....
Back Panel I/O Ports
- 1 x PS/2 keyboard or mouse
- 1 x 6 in 1 audio jack
- 6 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x optical SPDIF-out port
- 1 x eSATA port
- 1 x DVI-D port
- 1 x Graphic Card port
- 1 x HDMI port
- 1 x IEEE1394 port
*www.msi.com/uploads/Image/product_img/other/mainboard/backio/7596_back.jpg
it has a vga port for old CRTs....
Oh...thanks man.ou are a lifesaver.
But now my monitor is getting screwed as well I guess.
The display is all distorted and the display is slipping to the bottom of the screen.It needs a few slaps to get it back to normal. :\
ANyone know what the problem might be??
I use an LG Flatron E700SH(17 inch)
Worst part is that all my upgrade plans will be thrown out of the drain if my monitor gets screwed.
And I don't have any extra cash at the moment to buy a new LCD. Sighs...if only we could use the money trainers in real life.:\
But now my monitor is getting screwed as well I guess.
The display is all distorted and the display is slipping to the bottom of the screen.It needs a few slaps to get it back to normal. :\
ANyone know what the problem might be??
I use an LG Flatron E700SH(17 inch)
Worst part is that all my upgrade plans will be thrown out of the drain if my monitor gets screwed.
And I don't have any extra cash at the moment to buy a new LCD. Sighs...if only we could use the money trainers in real life.:\
Piyush
Lanaya
790gx will cost u between 6.5-7.5kBTW what is the average cost of a 790 based mobo??
P.S:- M too lazy too google.
790fx will cost u above 10k
coderunknown
Retired Forum Mod
But now my monitor is getting screwed as well I guess.
The display is all distorted and the display is slipping to the bottom of the screen.It needs a few slaps to get it back to normal. :\
ANyone know what the problem might be??
I use an LG Flatron E700SH(17 inch)
Worst part is that all my upgrade plans will be thrown out of the drain if my monitor gets screwed.
And I don't have any extra cash at the moment to buy a new LCD. Sighs...if only we could use the money trainers in real life.:\
get your monitor repaired. i was too having same problem. later the condition got so bad, i once angrily smacked the monitor breaking it stand. repair cost me near 1k.
790GX from Biostar avl for as low as 4.5k(1 Pcie X16 slot) or Biostar TA790GX A3+: 5.5k (crossfire supported & mosfet cooling.
rahul.007
bORn To RIse....
mine msi 790gx-g65 costed rs 6.5k(abt 3 weeks back).... should get it under 6.3k....
coderunknown
Retired Forum Mod
@fellas above
thanks mates.
BTW I am getting my monitor fixed tommorow.Thankfully nothing has broke yet.
my monitor stand still broken. however no problem from it, just can't turn monitor. the internal damage costed me 1k.
Piyush
Lanaya
cool!!
but is it a good performer( Biostar TA790GX) as compare to other brands?
coderunknown
Retired Forum Mod
0.3k? only? looks like u acted early so u payed less.
thats something not good with bio. with Asus & MSI, you can OC the IGP from 700Mhz on 790GX or 500Mhz on 780G/785G to 1Ghz with very basic cooling. maybe installing a fan on side of cabby, thats all.
with bio, this poses a bit of problem. cause the heatsink not so good. on 790GX(same for 78*G) can't be OC much. maybe 800Mhz-900Mhz. that also when fan cooled. however, HD3300 @ 700Mhz, that also 4.3k, its a killer deal.
one board with better cooling is TA785G3 HD. its northbridge HS is better than other bio's crappy heatsinks (OC should be easy & fun). also got 128Mb DDR3 (other bio's got DDR2) Samsung Ram (good for OC). also the board looks cool. just looses to ECS Black Series 785G boards.
*img693.imageshack.us/img693/4558/a785ga11.jpg
only negative points are:
1. solid caps only near proccy socket. rest electrolyte.
2. a stupid FLOPPY port. no cooling for the Sideport memory.
3. the sata ports are all facing up. & also a bit away from the side. install any midrange graphics card & 3 sata ports are rendered useless the very moment (hopefully 3 will be available).
- Status