BSOD after overclocking

compnoob

Right off the assembly line
I bought my 1st p.c and the config is as follows:
mobo: asus m4a78lt-m le
pro: amd x4 635
gcard: hd5670 1gb ddr3
ram: 4gb 1333mhz ddr3 corsair
mercury psu: 450w.
I tried to overclock but the windows wont boot up even if i increase the o.c 2%. it just crashes(blue screen with some error).
i tried all the other posts n stuff from google here but same problem...
any idea how i can get my processor to overclock?
 
J

Joker

Guest
Re: Oc help!!

first and the foremost, u have a very poor PSU.
 
OP
C

compnoob

Right off the assembly line
Re: Oc help!!

so i cant overclock till i get a better one? even if it goes to 3.1 or so.. id be really happy.
 
J

Joker

Guest
Re: Oc help!!

yup, definitely the case of ur PSU not been able to power the processor. especially cuz u also use a discrete graphic card too. i dont even think that mercury 450w can give you even 250w of power.

here are few options"

fsp saga II 500w @ 2200 [good vfm psu, not suitable if ur cabinet has bottom mounting cuz this psu has short cables.]
corsair cx400 @ 2600
seasonic s12II 420w @ 3200
corsair vx450 @ 3400

dont buy el cheapo psu from intex, quantum, zebronics, cooler master etc.
 

asingh

Aspiring Novelist
Please do what all have suggested. Run at bare minimal stock on the power unit. Do not try any benchmarks or OC'ing.
 
OP
C

compnoob

Right off the assembly line
ok i have about 5k to spend. i think ill buy a cpu cooler too. will buy it today or tomorrow.
any ideas which one i should buy? ill get a fps saga 500w and then which cpu cooler?
thanks for the advice guys.
 

pegasus

Journeyman
I bought my 1st p.c and the config is as follows:
mobo: asus m4a78lt-m le
pro: amd x4 635
gcard: hd5670 1gb ddr3
ram: 4gb 1333mhz ddr3 corsair
mercury psu: 450w.
I tried to overclock but the windows wont boot up even if i increase the o.c 2%. it just crashes(blue screen with some error).
i tried all the other posts n stuff from google here but same problem...
any idea how i can get my processor to overclock?
CPU wattage - 95W
AMD Processors for Desktops: AMD Phenomâ„¢, AMD Athlonâ„¢ FX, AMD Athlonâ„¢ X2 Dual-Core, AMD Athlonâ„¢, and AMD Sempronâ„¢ Processor

Motherboard supports CPU up to 95W
ASUSTeK Computer Inc. - Motherboards - ASUS M4A78LT-M LE

Overclocking? - definitely not recommended.

New, good quality PSU : highly recommended. :)
 
OP
C

compnoob

Right off the assembly line
OK! i bought a FPS saga II 500w. Dint buy any cpu cooler. i still get the same problem. i increase the FBS from 200 to 202 and no boot.. still get a blue screen.
since i dont plan to increase the voltage.. is it still not safe to overclock on my mobo?
and my cpu temp is like 50-55c. is this normal for a non-overclocked cpu?
 
Last edited:

coderunknown

Retired Forum Mod
i have exact same processor & even after running some heavy benchmark doesn't cross 50. at idle its 25-28 for me. something seriously wrong with the HSF.

check the heatsink. if there is any gap between the base & processor. also you can undervolt the processor to 1.25V & it should still pass all benchmark & games without any BSOD.

also have you removed the HSF anytime soon? if so, the stock TIM maybe missing & the cause of the overheat.
 
OP
C

compnoob

Right off the assembly line
nope... i made the guy who sold me the p.c to come fix the psu for me... apart from that the case was never opened...
 

topgear

Super Moderator
Staff member
ok i have about 5k to spend. i think ill buy a cpu cooler too. will buy it today or tomorrow.
any ideas which one i should buy? ill get a fps saga 500w and then which cpu cooler?
thanks for the advice guys.

Get CM Hyper N520 @ 2K
 
OP
C

compnoob

Right off the assembly line
nope... i just bought a thermal paste, cool master one for 125 bucks. Was having a final year technical seminar to give. That assembler guy will come today or tomorrow.
Was just wondering, my cabinet is a fontech one. Does that make any difference to the temp? it has only 2 fans in it. one on the side and one on the back.
the reason why i want to overclock is that when i play splinter cell: conviction, the game sort of like freezes for a while. say 10-15sec at random. when i overclock, it does not, but the temp shoots right to around 65-70c.
People show they go upto 3.2Ghz on stock. so even i wana do it. :)
 
Last edited:

coderunknown

Retired Forum Mod
nope... i just bought a thermal paste, cool master one for 125 bucks. Was having a final year technical seminar to give. That assembler guy will come today or tomorrow.

i'll advice do it yourself.

Was just wondering, my cabinet is a fontech one. Does that make any difference to the temp? it has only 2 fans in it. one on the side and one on the back.

what size? 80mm? or smaller? also the bundled fans on these cheap desi cabbies doesn't work as they should. test it yourself. take a Incense stick & light it. place it close to the fan while the PC is running. this will show if the fan is really effective or its just spinning without any cooling effect.

the reason why i want to overclock is that when i play splinter cell: conviction, the game sort of like freezes for a while. say 10-15sec at random. when i overclock, it does not, but the temp shoots right to around 65-70c.
People show they go upto 3.2Ghz on stock. so even i wana do it. :)

Athlon II X4 is more than enough to run SC5. add to it you have HD5670. maybe the problem is with the game. well, if Cool&Quite is on, turn it off while gaming.
 

topgear

Super Moderator
Staff member
^ If ur cabby allows, install a rear fan as exhaust.....

OP's cabby has a fan at the back side so he should try install a front fan instead anyway ;-)

@ OP - what about other resource hungry games like metro 2033, crysis 2, BFBC2 - are they working fine ? you may need to update the games first to make sure there's no software issue.
 
Top Bottom