Blue screen

[Nandkishor Kale]

With blue screen following message display:-
A Problem has been detected and windows has been Shut down to prevent damage to your computer
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is..........
Check to make.............
If problem continue,......
Technical information
***STOP: 0x000000D1 (0x00000034,0x00000002,0x0000000,0xF97F48F0)
***IdeChnDr.sys - Address F97F48F0 base at F97EF000, DateStamp 3d99eac3
Beginning dumpof physial Memory
Physical memory dump complete
Contact your system administrator or technical support group for further assistance.
OS: windows xp Pro.
Intel 850mv motherboard with intel P4 1.5 processor
Samsung DVD ROM etc.
Pl. show solution

 

[slugger]

if u usin Logitech Mouse den u may wan2 install d latest mouseware from their website

have u also istalled sum new hardware recently like a new Hard disk or sumthin? if so den it can aslo b d cause of d problem, unplug it and c if it solves ur problem

i can say this bcos u have poste d IDECHNDR.sys in ur error message

u may wan 2 uninstalld friver and den re-install it

 

[shady_inc]

This may be caused if you installed some new hardware or sofware recently in a faulty manner.When does this error exactly occur.During bootup?? (my most likely guess).

 

[Nandkishor Kale]

Thanks for the suggestion. I will go for the latest driver of Logitech mouseware. The problem occurs during boot, but it came few days before during work. Meanwhile the frequency of error was incrised & at last I reinstalled the OS by another PC. I will discuss, if the error comes again. Thanks

Thanks for the suggestion. I will go for the latest driver of Logitech mouseware. The problem occurs during boot, but it came few days before during work. Meanwhile the frequency of error was incrised & at last I reinstalled the OS by another PC. I will discuss, if the error comes again. Thanks

OK

 

[Nandkishor Kale]

Thanks for the suggestion.
Now I reinstalled the OS.
My PC has another problem from last two months. I am posting the new thred. pl. look it & suggest any solution.

 

[ravi_9793]

Thanks for the suggestion.
Now I reinstalled the OS.
My PC has another problem from last two months. I am posting the new thred. pl. look it & suggest any solution.

give the link of that thread

 

[anandk]

ok i see you've reinstld ur os, but just for yr info:

STOP 0x0000000A or IRQL_NOT_LESS_OR_EQUAL
A kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software. The name of the offending device driver often appears in the Stop error and can provide an important clue to solving the problem. If the error message points to a specific device or category of devices, try removing or replacing devices in that category. If this Stop error appears during Setup, suspect an incompatible driver, system service, virus scanner, or backup program. This KB314063 may show you the direction.

more at *www.winvistaclub.com/t3.html