Bios reporting very high Vcore, Vram

sukesh1090

Adam young
Hello, I am having a AMD phenom II 955 BE running on a Gigabyte GA-880GM-USB3 motherboard and my PSU is Seasonic S12 II 520W. Today I booted in to Bios and I noticed that its showing vcore of 2.00v instead of 1.4v, Vram of 2.3v instead of 1.5v and PSU 12v rail at 16.17v. I have attached a picture of the bios please check it let me know whether its a problem with my MB or PSU.

Thank you.
 

Attachments

  • IMG_20170416_231934.jpg
    IMG_20170416_231934.jpg
    194.7 KB · Views: 243
  • IMG_20170416_231953.jpg
    IMG_20170416_231953.jpg
    198.2 KB · Views: 257

skeletor

Chosen of the Omnissiah
Is it still showing the same?

Seems like some resistor used for measurement has conked off.
 
OP
sukesh1090

sukesh1090

Adam young
I didn't turn on the system after that. Don't want to loose gfx card or something because of this faulty mobo. It used to restart once most of the times when I used to start the system. I still don't understand how on the mother earth I was playing Witcher on this system without blowing it as my processor, ram were all being fed with such a high voltage.
 

skeletor

Chosen of the Omnissiah
I didn't turn on the system after that. Don't want to loose gfx card or something because of this faulty mobo. It used to restart once most of the times when I used to start the system. I still don't understand how on the mother earth I was playing Witcher on this system without blowing it as my processor, ram were all being fed with such a high voltage.

That's what I said, may be the voltage being fed is just fine and only the measurement resistor has conked off.

If you have a voltmeter, you can check your PSU's output on your own.

But yes, you're better off if you don't use the system.
 

topgear

Super Moderator
Staff member
I didn't turn on the system after that. Don't want to loose gfx card or something because of this faulty mobo. It used to restart once most of the times when I used to start the system. I still don't understand how on the mother earth I was playing Witcher on this system without blowing it as my processor, ram were all being fed with such a high voltage.

must be some sensor issue but just for the sake of trying flash the bios using latest version. Also make sure you don't have any fancy overclocking software installed on windows or any such auto over clock / boost bios setting.
 
Top Bottom