Are these values too less?

[nilanko]

*i.imgur.com/DZuD4.png

Are the SNR and attenuation values too less? I have recently seen people's screenshots showing quite high values...like 30 dB and like that..

 

[sygeek]

SNR Margin and Line Attenuation - What do they mean?

 

[siddharthmakwana]

i there any problem....??? or u r just curious ??

my values for same model
SNR (Downstream) 12.55 dB
SNR (Upstream) 26.0 dB
Line Attentuation(Downstream) 52.5 dB
Line Attentuation(Upstream) 27.5 dB

 

[nims11]

Attenuation should be as low as possible. so its good in your case.
SNR should be as high as possible. (at least above 10 dB). contact BSNL.

 

[nilanko]

SNR Margin and Line Attenuation - What do they mean?

Thanks, that made me understand everything.

i there any problem....??? or u r just curious ??

my values for same model
SNR (Downstream) 12.55 dB
SNR (Upstream) 26.0 dB
Line Attentuation(Downstream) 52.5 dB
Line Attentuation(Upstream) 27.5 dB

No, just curious.

Attenuation should be as low as possible. so its good in your case.

That's good news.

SNR should be as high as possible. (at least above 10 dB). contact BSNL.

That's bad news. Though I have no such connectivity problems.

 

[siddharthmakwana]

are there any other wifi access point of someone else near by your house... ??

 

[nilanko]

^^Yes. My neighbour's.

 

[siddharthmakwana]

it might be possible that u n ur neighbor's wifi are running on the same channel .... this might be causing interference and lowering of ur SNR n attenuation values ....

 

[nilanko]

So what to do then?

 

[asingh]

^^Yes. My neighbour's.

Oh NOOOOOOOOOOOOOOOO.....! Not "NEIGHBOR" again.

I told you what would happen if you used this word again.

 

[siddharthmakwana]

So what to do then?

change ur channel so that it does not interfere with ur neighbor.....

 

[Anorion]

wireless network configuration, change the broadcast frequency, then your wifi will be in a different channel than your neighbor

 

[sygeek]

^^Yes. My neighbour's.