quicky008
Technomancer
I have a 650VA apc ups(be650y-in) which is around 6 yrs old.However it's battery seems to have become rather weak of late as it has started giving a backup time of only 40-60 secs during power cuts nowadays(earlier it varied from 5-10 mins).So I decided to get the older battery replaced because of this.Unfortunately however, I couldn't find a genuine apc battery anywhere-even the technician at apc's service centre told me that the particular battery that this ups requires(RBC-17) is out of stock.
Earlier I had been told that the batteries manufactured by exide are generally compatible with apc's UPSes-initially I was somewhat hesitant to go for a 3rd party product but as I had failed to procure an original apc certified battery,I decided to check out what options were available from exide.When I visited a local exide showroom,I was shown a battery that was rated at 12V 7Ah-their salesman told me this would work on my ups.So I went ahead and bought it.
After replacing the older battery with the new one,my ups turned on in one go and for a moment it seemed everything was ok .However when I checked the status of my ups using powerchute plus s/w,it showed me that even though the battery was fully charged,the available battery runtime was less than 1 min,which was very baffling to say the least as the battery I had earlier could provide backup for 5 mins or more on full charge.I tested the ups by turning off the power from the ac mains-then the ups started beeping rapidly and the battery was fully depleted within 20-30 secs.
Why is the battery draining so rapidly even though its fully charged?Is it happening because I'm not using an original apc battery?What should I do now to rectify this problem?Please help-i'm really worried
.
Earlier I had been told that the batteries manufactured by exide are generally compatible with apc's UPSes-initially I was somewhat hesitant to go for a 3rd party product but as I had failed to procure an original apc certified battery,I decided to check out what options were available from exide.When I visited a local exide showroom,I was shown a battery that was rated at 12V 7Ah-their salesman told me this would work on my ups.So I went ahead and bought it.
After replacing the older battery with the new one,my ups turned on in one go and for a moment it seemed everything was ok .However when I checked the status of my ups using powerchute plus s/w,it showed me that even though the battery was fully charged,the available battery runtime was less than 1 min,which was very baffling to say the least as the battery I had earlier could provide backup for 5 mins or more on full charge.I tested the ups by turning off the power from the ac mains-then the ups started beeping rapidly and the battery was fully depleted within 20-30 secs.
Why is the battery draining so rapidly even though its fully charged?Is it happening because I'm not using an original apc battery?What should I do now to rectify this problem?Please help-i'm really worried