AMD Ryzen Build
- Thread starter Oli
- Start date
OP
Oli
Broken In
I will buy the CPU from Nehru place, New delhi and for the GPU i will need to check first if the one i want is available in Nehru Place otherwise will purchase it online.
OP
Oli
Broken In
After going through few videos and reading online decided to buy a good cabinet, So bought the NZXT S340 Elite Matt black / red version (link below). I know its a little over budget but i got my diwali bonus so decided to use some of it. It comes with 2 fans, one at the rear and one on top. You can put 2 fans at the front for intake. I will take out 2 red led 120MM fans from my circle cabinet and put them in this one, so then i'll be having 2 intake fans and 2 exhaust fans, Will probably put the circle fans as exhaust to make their LED's come to use.
NZXT MID TOWER CABINET (ATX) - SOURCE 340 ELITE MATTE BLACK/RED WITH TRANSPARENT SIDE PANEL
p.s - got it from mdcomputers (free shipping due to festive season)!
NZXT MID TOWER CABINET (ATX) - SOURCE 340 ELITE MATTE BLACK/RED WITH TRANSPARENT SIDE PANEL
p.s - got it from mdcomputers (free shipping due to festive season)!
SaiyanGoku
kamehameha!!
OP
Oli
Broken In
Sure, I'll do that once my build is complete. Btw the air intake is not an issue as there is enough space on top and bottom of the front panel.
OP
Oli
Broken In
Hi Guys,
So i finished my build yesterday. When i plugged in the power, there was a 1 second blackout in the house and the home inverter got turned on during that 1 second (it made that beep sound which it usually does during power cuts)..so i immediately turned off the power from pc and everything was back to normal. I was using an old extension cord which works perfectly, now hoping that it couldnt take the load and now i have ordered an UPS (APC)..also will be calling an IT person to check everything..wish me luck
P.s - this was my first attemp building a pc
Final build
-CPU - Ryzen 5 1600 (Rs. 15,900)
-GPU - Msi Gtx 1060 Gaming X 6GB (Rs. 26,500)
-Motherboard - Msi B350 Gaming Plus (Rs. 8,450)
-Ram - Adata spectrix D40 8GB (3000 Mhz) (will buy another) (Rs. 6,700)
-HDD - WD Blue 1TB 7200 RPM (Rs. 3,350)
-Power Supply - Corsair TX550M Gold (6,800)
-Cabinet - NZXT S340 Elite (Rs. 8,500)
-UPS - APC BX600C (Rs. 2,700)
-Monitor - Using old Benq monitor
Total - Rs. 78,900
Pic(will click one with gpu today)-
215AA78C-7D69-455A-886D-47720EBA3C97 — Postimage.org
@SaiyanGoku
So i finished my build yesterday. When i plugged in the power, there was a 1 second blackout in the house and the home inverter got turned on during that 1 second (it made that beep sound which it usually does during power cuts)..so i immediately turned off the power from pc and everything was back to normal. I was using an old extension cord which works perfectly, now hoping that it couldnt take the load and now i have ordered an UPS (APC)..also will be calling an IT person to check everything..wish me luck
P.s - this was my first attemp building a pc
Final build
-CPU - Ryzen 5 1600 (Rs. 15,900)
-GPU - Msi Gtx 1060 Gaming X 6GB (Rs. 26,500)
-Motherboard - Msi B350 Gaming Plus (Rs. 8,450)
-Ram - Adata spectrix D40 8GB (3000 Mhz) (will buy another) (Rs. 6,700)
-HDD - WD Blue 1TB 7200 RPM (Rs. 3,350)
-Power Supply - Corsair TX550M Gold (6,800)
-Cabinet - NZXT S340 Elite (Rs. 8,500)
-UPS - APC BX600C (Rs. 2,700)
-Monitor - Using old Benq monitor
Total - Rs. 78,900
Pic(will click one with gpu today)-
215AA78C-7D69-455A-886D-47720EBA3C97 — Postimage.org
@SaiyanGoku
Last edited:
vivek g delhi
Broken In
Thats Scary.Hi Guys,
So i finished my build yesterday. When i plugged in the power, there was a 1 second blackout in the house and the home inverter got turned on during that 1 second (it made that beep sound which it usually does during power cuts)..so i immediately turned off the power from pc and everything was back to normal. I was using an old extension cord which works perfectly, now hoping that it couldnt take the load and now i have ordered an UPS (APC)..also will be calling an IT person to check everything..wish me luck
P.s - this was my first attemp building a pc
Final build
-CPU - Ryzen 5 1600 (Rs. 15,900)
-GPU - Msi Gtx 1060 Gaming X 6GB (Rs. 26,500)
-Motherboard - Msi B350 Gaming Plus (Rs. 8,450)
-Ram - Adata spectrix D40 8GB (3000 Mhz) (will buy another) (Rs. 6,700)
-HDD - WD Blue 1TB 7200 RPM (Rs. 3,350)
-Power Supply - Corsair TX550M Gold (6,800)
-Cabinet - NZXT S340 Elite (Rs. 8,500)
-UPS - APC BX600C (Rs. 2,700)
-Monitor - Using old Benq monitor
Total - Rs. 78,900
Pic(will click one with gpu today)-
215AA78C-7D69-455A-886D-47720EBA3C97 — Postimage.org
@SaiyanGoku
That OlD extension could have fried your brand new system
Sent from my SM-G920I using Tapatalk
OP
Oli
Broken In
Yes..it is scary and i've invested a lot on this system. IT person will come tomorrow or on Sunday..hope all goes well..
Final build pic (removed tempered glass for clear view) -
CC11226F-8E96-4C23-96D6-BDBF2E1F6525 — Postimage.org
Last edited:
OP
Oli
Broken In
Hey guys,
So my PC powered on. CPU fan running fine, GPU LED's are on, all 4 cabinet fans running fine, Ram led's are on..everything is running but the monitor is saying "No signal input"..i tried putting the VGA cable in my laptop and the monitor worked fine..can anyone help me resolve this issue?
So my PC powered on. CPU fan running fine, GPU LED's are on, all 4 cabinet fans running fine, Ram led's are on..everything is running but the monitor is saying "No signal input"..i tried putting the VGA cable in my laptop and the monitor worked fine..can anyone help me resolve this issue?
I hope your monitor has DVI input as that graphics card has DVI-D output so a simple DVI-VGA convertor won't work.
OP
Oli
Broken In
Im using VGA male to male wire which is plugged into the motherboard VGA socket..monitor isn't connected to the GPU directly because i don't have VGA port on GPU..its some other type..do i really need to connect my monitor directly to the GPU?
OP
Oli
Broken In
Oh that makes sense..but just wondering why is there a VGA port on a AM4 (B350) motherboard then?
P.s - have ordered hdmi male to male cable, will connect with television and check tomorrow..will order new monitor next week
That is for situation where you install AMD "A" series processor that come with integrated gpu just like intel core i processor.
OP
Oli
Broken In
Hey Guys,
Good news!
So, Everything was fine..nothing got fried up seems like my power switch (the one on the wall) was faulty and loose. HDMI cable worked like a charm..i used it with my television and got the display..updated bios..installed windows etc
But i'll need to buy a monitor soon cuz i can't use the television in my living room all the time for my own..can anyone suggest any monitor to finish off my build?
Size - maximum 20-23 inches
Budget - 10,000
Preferred resolution - 1080P (as i have a gtx 1060)
Current choice - ASUS VP228HE - 21.5 INCH GAMING MONITOR (1Ms RESPONSE TIME, 75Hz REFRESH RATE, FHD)
(75HZ, 1 MS response time)
P.s - I have no knowledge about display quality..is the above a good choice?
Good news!
So, Everything was fine..nothing got fried up seems like my power switch (the one on the wall) was faulty and loose. HDMI cable worked like a charm..i used it with my television and got the display..updated bios..installed windows etc
But i'll need to buy a monitor soon cuz i can't use the television in my living room all the time for my own..can anyone suggest any monitor to finish off my build?
Size - maximum 20-23 inches
Budget - 10,000
Preferred resolution - 1080P (as i have a gtx 1060)
Current choice - ASUS VP228HE - 21.5 INCH GAMING MONITOR (1Ms RESPONSE TIME, 75Hz REFRESH RATE, FHD)
(75HZ, 1 MS response time)
P.s - I have no knowledge about display quality..is the above a good choice?
bssunilreddy
Chosen of the Omnissiah
OP
Oli
Broken In
I heard this monitor has a problem with some lines showing up on screen when freesync is enabled
source - Faint vertical lines when 75hz refresh rate on monitor
bssunilreddy
Chosen of the Omnissiah
OP
Oli
Broken In
Even i liked this monitor a lot, though i have only seen it in pictures but it looks stunning. I'll purchase this monitor next week and post final pics of my complete build.
Thanks a lot!