Want a New AMD machine

rijinpk1

Aspiring Novelist
OK also i was thinking whether corsair vengence or the kingston hyperx is better and should i buy 2x4gb ram or just 1x8 gb ram, two could help in identifying which was has gone bad, what do you think

hyperx blu is a better overclocker than vengeance. i suggest to get hyperx blue 2x 4gb from flipkart . it sells one stick for rs 2250.
 
OP
K

king_of all

Journeyman
hyperx blu is a better overclocker than vengeance. i suggest to get hyperx blue 2x 4gb from flipkart . it sells one stick for rs 2250.

OK thank you i will try to find a better shop for amd :)

OK thank you i will try to find a better shop for amd :)
thank you for being so patient with me and answering all me questions :_ onelast question if I got 970a-ud3 somehow and some money which 1866 mhz RAM should i take to get better graphics ? :)
 

bssunilreddy

Chosen of the Omnissiah
could you give ther address also what about 650ti boost 1gb
Also
M5A97 R2.0 has 4+2 power phase design will it effect the working much of the pc

You cannot overclock with 4+2 power phases and it does not pass any stability tests but it does not affect your gaming at all.
 
OP
K

king_of all

Journeyman
OK just heard from a friend about a new MB GA-970A-UD3P, any comments on this it got all the latest feature of ud3 it says ultra durable 4 as compare to ultra durable 3 in ud3
 

rijinpk1

Aspiring Novelist
You cannot overclock with 4+2 power phases and it does not pass any stability tests but it does not affect your gaming at all.

small overclock should not create any problems at all.

OK just heard from a friend about a new MB GA-970A-UD3P, any comments on this it got all the latest feature of ud3 it says ultra durable 4 as compare to ultra durable 3 in ud3

buy it if you can find it in a local shop. Even old ud3 is very hard o find.
 

rijinpk1

Aspiring Novelist
Also Any good 1866 DDR3 RAM ?

you wont notice any considerable real world improvements unless you run memory intensive benchmarks. those high speed memory is essentially intended for those people who likes to set world records. you absolutely wont need it.
 

kg11sgbg

Indian Railways - The Vibrant and Moving INDIA
@OP if you are not into overclocking,get the DS3 motherboard.Won't be disappointed at all,since UD3 boards are a rarity.Of course if you find one(UD3) then buy without a blink of an eye.

you wont notice any considerable real world improvements unless you run memory intensive benchmarks. those high speed memory is essentially intended for those people who likes to set world records. you absolutely wont need it.
+1 for this.
Why waste money on such high memory components,when the work to be performed can be easily done by budget-to-mid range RAM's?
The remainder amount could be easily decided to buy some extra accessories if needed.
 

Cilus

laborare est orare
^^ Agreed. HyperX Blue Rams do have the reputation to run at 2000 MHz speed. Get the 1600 MHz one, learn how to overclock it and then overclock it to higher speed.
 
OP
K

king_of all

Journeyman
OK guy I am not getting the UD3 I have tried to find it for 2 days in nehru place but no result, SO now I have increased my budget from 30k to 35-38K please suggest any good MB in that also which would have front USB3 8+2 power phase also since I might not be doing any OC will M5A97 LE R2.0 is a good MB
ALso IS GA-990XA-UD3 a good MB ?
 

rijinpk1

Aspiring Novelist
OK guy I am not getting the UD3 I have tried to find it for 2 days in nehru place but no result, SO now I have increased my budget from 30k to 35-38K please suggest any good MB in that also which would have front USB3 8+2 power phase also since I might not be doing any OC will M5A97 LE R2.0 is a good MB
ALso IS GA-990XA-UD3 a good MB ?

if you are not overclocking, get the asus LE or gigabyte ds3 mobo. if you want to overclock in future go for asus m5 a97 evo r2.0 at 8k / ECS a970a deluxe at 6k

since you have increased your budget, i suggest this
AMD FX 8320 -10000,
Gigabyte GA-970A-DS3-5200 / asus m5 a97 evor2.0- 8000/ecs a970a deluxe- 6000(if you want overclock without any problems)
kingston hyperx blu 4gb - 2250
r9 270x - 15k / gtx 760 - 19.5k
Seasonic S12II 520 -4000.
 
OP
K

king_of all

Journeyman
I dont have much work than playing games so buying 8320 would be more, I would like to stay with 6300 Also I am thinking id DS3 a good MB ALso please see if this config is ok and will keep running fine for 4-5 years
FX6300+GA-970a-ds3 or M5a97 LE r2.0 { which ever MB is best please suggest }
kingston hyperx blu 4gbx2
Zotac 650ti boost 2gb
Antec vs550 or VP550 or CM thunder 600 {SInce I can't fine seasonic in Nehru place }

ALso I have heard Aftersale service of asus is very bad ?
I have to buy this 2morrow

ALso I could buy SSD 120gb or 200 gb with the extra money any suggestion also I will be downloading like 10-15 hour daily will it be good for ssd
 

bssunilreddy

Chosen of the Omnissiah
I dont have much work than playing games so buying 8320 would be more, I would like to stay with 6300 Also I am thinking id DS3 a good MB ALso please see if this config is ok and will keep running fine for 4-5 years
FX6300+GA-970a-ds3 or M5a97 LE r2.0 { which ever MB is best please suggest }
kingston hyperx blu 4gbx2
Zotac 650ti boost 2gb
Antec vs550 or VP550 or CM thunder 600 {SInce I can't fine seasonic in Nehru place }

ALso I have heard Aftersale service of asus is very bad ?
I have to buy this 2morrow

ALso I could buy SSD 120gb or 200 gb with the extra money any suggestion also I will be downloading like 10-15 hour daily will it be good for ssd

AMD FX 6300,
Gigabyte GA-970A-UD3,
Corsair Vengeance 1600MHz 4GB,
Asus R9 270X 2GB OC,
Antec VP550P,
Samsung 840 EVO 120GB SSD.

Asus RMA is best now compared to others but their lower end models are not able to OC properly.
 
AMD FX 6300,
Gigabyte GA-970A-UD3,
Corsair Vengeance 1600MHz 4GB,
Asus R9 270X 2GB OC,
Antec VP550P,
Samsung 840 EVO 120GB SSD.

Asus RMA is best now compared to others but their lower end models are not able to OC properly.

Kingston HyperX Blu offers same performance is much cheaper.
 
OP
K

king_of all

Journeyman
OK Guys so I bought the new rig here is the config
FX 6300 + Asus M5A97 EVO R2.0 - 15500
Kingston Hyper x blu 1600 Mhz 4gb x2 - 5400
Cooler master thunder 600W - 4200 { My Bro-in-Law insisted on it }
Zotac GTX 650 TI Boost 2 GB - 13200

-Also IN the Bios I just changed the profile to optimal and I was able to get 3825Mhz from the processor isn't it awesome, please suggest if it is safe to do this so soon, or should i do it may be 2-3 years later, here is the pic of the BIOS
-Also I am not getting exact 1600Mhz in the RAM is their any problem ?

DSC_0102.jpg
Please also comment about this rig :)
 

Cilus

laborare est orare
Without a custom CPU cooler, running Processor at higher speed is not advised if you don't really know what are you doing. Though the stock cooler comes with FX-6300 can handle 200 MHz-300 MHz overclocking. Now 3825MHz is 325MHz higer than the stock speed of the processor which I don't recommend. Also don't use the Automatic overclocking features you are using currently. Instead of learn how to do manual overclocking by changing the CPU current, Multiplier and LLC in the BIOS and 3700 MHz is the speed I recommend with the stock cooler. You don't need to wait 2 years for learning it, just go through some overclocking guides and we can also help you here.
Rams are really overpriced, almost by 800 bucks. And the choice of PSU is not good, though it can handle the GPU. I guess Flipkat is offering lesser price for the Ram.
 

bssunilreddy

Chosen of the Omnissiah
OK Guys so I bought the new rig here is the config
FX 6300 + Asus M5A97 EVO R2.0 - 15500
Kingston Hyper x blu 1600 Mhz 4gb x2 - 5400
Cooler master thunder 600W - 4200 { My Bro-in-Law insisted on it }
Zotac GTX 650 TI Boost 2 GB - 13200

-Also IN the Bios I just changed the profile to optimal and I was able to get 3825Mhz from the processor isn't it awesome, please suggest if it is safe to do this so soon, or should i do it may be 2-3 years later, here is the pic of the BIOS
-Also I am not getting exact 1600Mhz in the RAM is their any problem ?

View attachment 12902
Please also comment about this rig :)

Just exchange the above Coolermaster PSU with Antec VP450P.OK. You have select the exact RAM profile from the drop down menu in the RAM menu.For eg.1333,1600. You have to select 1600.OK.
 

rijinpk1

Aspiring Novelist
OK Guys so I bought the new rig here is the config
FX 6300 + Asus M5A97 EVO R2.0 - 15500
Kingston Hyper x blu 1600 Mhz 4gb x2 - 5400
Cooler master thunder 600W - 4200 { My Bro-in-Law insisted on it }
Zotac GTX 650 TI Boost 2 GB - 13200

-Also IN the Bios I just changed the profile to optimal and I was able to get 3825Mhz from the processor isn't it awesome, please suggest if it is safe to do this so soon, or should i do it may be 2-3 years later, here is the pic of the BIOS
-Also I am not getting exact 1600Mhz in the RAM is their any problem ?

View attachment 12902
Please also comment about this rig :)

congrats. post pics also ;)
you should have believed forum members rather than your bro for the choice of power supply.
 

kg11sgbg

Indian Railways - The Vibrant and Moving INDIA
@king_of all, congrats for your brilliant purchase.Though nowadays I like and favour Intel,but for me AMD was always a favourable liking,even now also.
Your rig temp. are absolutely O.K. as depicted on your BIOS module pic. you've sent,and for the RAM configuration,do as @bavusani advised to do.
 
Top Bottom