Help Me to Overclock 955 !!

Status
Not open for further replies.

rohit2hell

Broken In
I got
AMD Phenom II 955 BE (3.2Ghz)
Asus M4A78 Series mothrbord
4 Gb DDR3 Ram (1333 Mhz)
1 GB HD4870 (MSI graphic card)
600 W Cooler Master SMPS

Can any one tell me How much can I overclock My CPU without Melting it :neutral:
And How to Overclock it??

Please..:smile:
Thanks In Advance
 

Krow

Crowman
Google AM3 overclocking guides. Monitor temps, should not go above 61, which is AMD specified limit. Get a good CPU cooler like the OCZ Vendetta 2 @ 2.6k before you clock it.
 

puneetgarg

Learn & Earn
i once tried to overclock my pc it gave a blue screen and restarted...
i tried several times but same thing happened..
me too wanna overclock my pc but dunno how to anybody can help...
i always keep my cabinet open... does it help to keep the PC temp. low ?
 

Krow

Crowman
@puneet config please. If Intel, asigh can help you.

@ rohit CPU cooler first. then clocks.
 

asingh

Aspiring Novelist
@puneet config please. If Intel, asigh can help you.

@ rohit CPU cooler first. then clocks.


Could both of you please update your signature with system specs. Also Compaddict is worried about the OPs PSU. Lets hear on that before imparting OC methodology...which we love to do so...! :p:p:p:p:p:p:p:p
 

puneetgarg

Learn & Earn
ok...thanks krow bro see my config in my sigi
i dont even know the abc of overclocking...
so please teach me considering me a noob :D
 

asingh

Aspiring Novelist
^^
1. Which PSU are you using.
2. Are you on Stock cooling for the CPU.
3. Could you download CPU-Z and post screen shots of the CPU/Memory and SPD tabs.
4. Download RealTemp and Prime95 also.
 

asingh

Aspiring Novelist
^^ Does it make a temperature log simultaneously which can be easily posted here...with the core temperatures.

Am asking, since it never even launches on my system....! If yes, we can use that for analysis..?
 

puneetgarg

Learn & Earn
^^
1. Which PSU are you using.
2. Are you on Stock cooling for the CPU.
3. Could you download CPU-Z and post screen shots of the CPU/Memory and SPD tabs.
4. Download RealTemp and Prime95 also.

*i37.tinypic.com/2dhd20i.jpg

*i36.tinypic.com/xfronb.jpg

*i36.tinypic.com/wb6n4o.jpg

here u go bro please help me out
 

asingh

Aspiring Novelist
^No, it does not. For a simultaneous log we can use OCCT linpack I think.

Then I suggest for this case, since we need online screen shots, RealTEMP in conjunction with Prime95 will do good. The OP can definately use Intel Burn test to verify system stability for his own sense.

@OP:
Will get back on the OC. Mean while, there is an OC thread in the 'CHIT CHAT' section. It has a flow chart. See if that makes sense.

What about the PSU, and HSF question I asked. 'Help us to help you'
 
Last edited:

Krow

Crowman
^Same thing can be done with RealTEMP plus Intel Burn Test right? Or CPUID H/W monitor with Intel Burn Test? That's what I did at least. :)
 

asingh

Aspiring Novelist
^^ Not really...

Cause when RealTEMP sensor check option is used, it at the same time stresses the CPU as per Prime95 (2x worker threads), and logs the temperatures on the interface. It is calibrated against TjMax, which we need for Intel cores. With Intel Burn test running, it would just show one singular value on the RealTEMP interface, same with CPUID.

I want to see the gradient, and variation when the core is load is being sequentially increased. RealTEMP logs this in stages. And all the stage temperatures are shown..
 

Krow

Crowman
^Hmmm... Since RealTEMP is only for Intel, I can't really learn about it either. :( I'm off to my AMD world... :)
 

asingh

Aspiring Novelist
^^
It does it like this:
*img29.imageshack.us/img29/3877/hyper212realtemp.jpg

See the temperature logs at various intervals. With Prime95 as the stressing engine.
 
Status
Not open for further replies.
Top Bottom