gohan89
Broken In
My config is:
Intel C2D E8400
4GB DDR2 800MHz
4770HD 512 GDRR5
Corsair 450W
Microtek 600VA
Recently I have been facing weird problems when powering up my computer.When I press on the start button in the cabinet after switching on the UPS (there is one green light and a yellow light on my cabinet both which light up when computer normally starts),the green light comes up but the yellow does not and subsequently does not,which normally starts up with both the lights.So I try this several times and sometimes even if I directly switch off the UPS ,the cabinet which should go off has the green light on.I think some charge remains in the cabinet.During the entire process the monitor does power on and show the boot screen.
Is there a problem with my PSU or any other component?
Please help me asap!!!
Intel C2D E8400
4GB DDR2 800MHz
4770HD 512 GDRR5
Corsair 450W
Microtek 600VA
Recently I have been facing weird problems when powering up my computer.When I press on the start button in the cabinet after switching on the UPS (there is one green light and a yellow light on my cabinet both which light up when computer normally starts),the green light comes up but the yellow does not and subsequently does not,which normally starts up with both the lights.So I try this several times and sometimes even if I directly switch off the UPS ,the cabinet which should go off has the green light on.I think some charge remains in the cabinet.During the entire process the monitor does power on and show the boot screen.
Is there a problem with my PSU or any other component?
Please help me asap!!!
