I recently replaced my old 1.6GHz Intel µp and SIS motherboard with a new 3 GHz µP and Intel genuine motherboard. I cannot use the OS in the old hard disk. The system re-boots repeatedly when I try doing it. The problem would be something of the drivers. If I replace all the system32 files the OS opens but I cannot do anything. If I replace only drivers, system reboots still. Can somebody help me and guide to me what files I must replace in system32 or what else I must be doing in order to open a OS in a Hard disk which has been installed with old drivers? Former is as stated SIS and the later Intel.
Using OS on a old hard disk on a new computer. Help please.
- Status
saROMan
QA Juggler
bro..u cant use it.......as the basic architecture ie proccy and mobo have changed so u cannot run the old OS...what u can do is.....Format(if u can )and install the OS with new mobo+proccy ..or if ur OS is xp then install it again..keeping the old XP ..it will ask wether u want to backup ur sys files etc or delete them....if u donn have any imp files on ur os..then use fresh install
Choto Cheeta
Rebooting
why not... if he just detach the HDD from the old system & attach it on the new mobo system... then at the time of boot OS will (98 2000, xp) ask or the installation disk (path).... & he just has to install the drivers of the new mobo.... thats it... why i am saying this?? as i have done that....
tuxfan
Technomancer
All that you need to do is re-install the MoBo and other drivers.
Start in safe mode, remove all the existing drivers and re-install the new drivers using the CD that came with the new MoBo. But of course, the system may not run as good as a new one. So if you want optimum performance, format and re-install.
Start in safe mode, remove all the existing drivers and re-install the new drivers using the CD that came with the new MoBo. But of course, the system may not run as good as a new one. So if you want optimum performance, format and re-install.
I have sevral crucial data and some very important software that I have installed in that OS. I dont have their installation disk and cannot afford formatting. The OS doesn't even open in safe mode. System reboots doing that. But the OS only starts if I replace all system32 files from another newly installed OS. But it's totally flawed then. To my knowledge, I presume it is good enough if I replace several folders of system32 (of the present 2500 files) and not all, for the OS to open without any problem.
saROMan
QA Juggler
saurav_cheeta said:
well bro dono how u managed it..but when u change mobo proccy....its not only these 2 components are chaged but all ur IRQ's , IDE settings, Bridge controllers , memory settings etc , in short every thing at the base changes...so just reinstall of Drivers wont help much....
any ways..Scorpio as u say u have rucial data and some very important software on the hdd..so what u can do is rename he program files folder ..then reinstall OS...after rename the prog files folder again......well tell u what i am not sure about this method....but worth giving a try...
tuxfan
Technomancer
Your system may not start in windows mode. But try to start it in DOS mode and run setup.exe of windows. That will update/replace all the necessary files. Then try starting it in safe mode and delete all the drivers from My Computer > Properties > Device Manager. Restart your machine and it will start detecting new hardware. Supply the right CDs and things should fall in place.
A clean re-install after a format is any day better. But since you can't afford to do that, try this.
A clean re-install after a format is any day better. But since you can't afford to do that, try this.
- Status