Tutorial: Flashing k550i to w610i !!

50pounds

Broken In
a_k_s_h_a_y said:
which menu ml are you using ??

for w610i flashed phone use w610i custom menu ml file from my esnips folder

anyway its very easy to do in case you are using shortcut method just copy menu ml to live folder



hii there !! was your phone locked to some operator ??

hold on lets try a different FS and Cust pack.. might work..
but i don't know much about SIM Locks !!

do u know in england which firmware is used in a factory w610i and k550i ??



ALSO NOTE SIM card might be damaged.. this happened to my old sim card..!
try another SIM
XS++ does not touch SIM Locks as far as i know

O2 is orange or something ?? of is that vodafone ?

hey there thanks for reply

02 is a uk network use to be called bt cellnet ive tryed 3 sim cards now all saying the same **** lol also ive flashed these files now and still no help.

also the sim lock was unlocked from a shop i went cost me £15 worked for every network untill i flashed my phone.

phone type is k550I had branded software orange on it/

K550_R6BC002_FS_CENT_EUROPE_RED52
K550_R6BC002_MAIN_GENERIC_LI_RED52

K550_HB1-06_Gen_CDA102568_207_R2A_GENERIC_CENT_EUROPE (custpack)

got them from this website: *se-firmware.extra.hu/?path=./Firmware/K550i/CID52/R6BC002/

now what am i going to do lol? thanks
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
^^^ ok dats bad.. i had bad feeling that u had got it unlocked..

now again its locked.. very badly...

try to put in the GDFS backup that u had done before following my tutorial

i hope you had made a GDFS backup before flashing to w610i but after unlocking your k550i !!
now write back that GDFS
this should work...!

use XS++ 3.0 to write back GDFS..

all the best !!

if it does not then i don't know about unlocking.. may be try to get that done from somewhere else .. the same place who had unlocked
now even the O2 original sim does not work ??


leave email id.. i shall mail you .. incase i find a solution !!
 

50pounds

Broken In
a_k_s_h_a_y said:
^^^ ok dats bad.. i had bad feeling that u had got it unlocked..

now again its locked.. very badly...

try to put in the GDFS backup that u had done before following my tutorial

i hope you had made a GDFS backup before flashing to w610i but after unlocking your k550i !!
now write back that GDFS
this should work...!

use XS++ 3.0 to write back GDFS..

all the best !!

if it does not then i don't know about unlocking.. may be try to get that done from somewhere else .. the same place who had unlocked
now even the O2 original sim does not work ??


leave email id.. i shall mail you .. incase i find a solution !!

sim card works fine in other phones so i dunno why it says insert correct sim for ill try the gdfs now see what happens hopefully it will work fingers cross ill post resluts
 

50pounds

Broken In
50pounds said:
sim card works fine in other phones so i dunno why it says insert correct sim for ill try the gdfs now see what happens hopefully it will work fingers cross ill post resluts

my log from xs++tryed it in v2.2.2 and in 3.0

11:12:04| XS++ v2.2 Ready !
11:12:04| Executed on Microsoft Windows Vista
11:12:23|
11:12:23| Attempting to open the interface...
11:12:23|
11:12:23| Turn off phone
11:12:23| Hold 'C' button on phone and connect phone.
11:12:23| You have 30 seconds.
11:12:23|
11:12:27| Baseband ID: 9900
11:12:27| Hardware Platform: DB2020
11:12:27| Protocol Version: 3.1
11:12:28| Phone name detected!
11:12:28|
11:12:28| Profiling SEMC phone...
11:12:28| Baseband ID: DB2020
11:12:28| OTP CID: 51
11:12:28| EROM CID: 52
11:12:28| EROM Color: Red
11:12:28| IMEI: 35489301xxxxxx
11:12:28| Phone ID: K550
11:12:28| Network: CENT_EUROPE
11:12:28| CDA: CDA102494/56 R2A
11:12:28| Firmware Version: R6BC002
11:12:28| EROM: R3A016
11:12:28| Ready for operation!
11:13:24|
11:13:24| Sending db2020_cid01_prodid_p3j.bin...
11:13:24| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
11:13:24| This is a PRODUCTION_ID loader
11:13:24|
11:13:24| Sending db2020_mem_patcher_cid52_r2a006.bin...
11:13:25| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
11:13:25| This is a MEM_PATCHER loader
11:13:25|
11:13:25| Sending db2020_red52_cs_r3a009.bin...
11:13:27| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
11:13:27| This is a CHIPSELECT loader
11:13:27| Activating loader...
11:13:27| Activating GDFS...
11:13:48| This loader is UNLOCKED
11:13:48| Run GDFS-script...
11:13:48| Wrote 0 variables!
11:13:48| Read 0 variables to .\Backup\K550_35489301xxxxxx_GDFSSCRIPT_OUTPUT_071008111348.script!
11:13:48| GDFS-Script was run successfully!
11:13:48| GDFS operation was successful
11:13:50| Disconnected... Unplug the phone
11:14:00|
11:14:00| Attempting to open the interface...
11:14:00|
11:14:00| Turn off phone
11:14:00| Hold 'C' button on phone and connect phone.
11:14:00| You have 30 seconds.
11:14:00|
11:14:04| Baseband ID: 9900
11:14:04| Hardware Platform: DB2020
11:14:04| Protocol Version: 3.1
11:14:04| Phone name detected!
11:14:04|
11:14:04| Profiling SEMC phone...
11:14:04| Baseband ID: DB2020
11:14:04| OTP CID: 51
11:14:04| EROM CID: 52
11:14:04| EROM Color: Red
11:14:04| IMEI: 35489301xxxxxx
11:14:04| Phone ID: K550
11:14:04| Network: CENT_EUROPE
11:14:04| CDA: CDA102494/56 R2A
11:14:04| Firmware Version: R6BC002
11:14:04| EROM: R3A016
11:14:04| Ready for operation!
11:14:13|
11:14:13| Sending db2020_cid01_prodid_p3j.bin...
11:14:13| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
11:14:13| This is a PRODUCTION_ID loader
11:14:13|
11:14:13| Sending db2020_mem_patcher_cid52_r2a006.bin...
11:14:14| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
11:14:14| This is a MEM_PATCHER loader
11:14:14|
11:14:14| Sending db2020_red52_cs_r3a009.bin...
11:14:16| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
11:14:16| This is a CHIPSELECT loader
11:14:16| Activating loader...
11:14:16| Activating GDFS...
11:14:37| This loader is UNLOCKED
11:14:37| Restoring the GDFS...
11:14:37| Attempting to write 1381 variables...
11:14:57| Wrote 1381 variables!
11:14:57| GDFS was restored successfully!
11:14:57| GDFS operation was successful
11:14:59| Disconnected... Unplug the phone
11:20:58| Shutting down...


no luck here is a piccy as well
also i found this: K550_MENU_ORIGINAL where do i put it?

my e-mail dazza193@hotmail.com
 
Last edited:
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
well sorry i verified it.. now
your phone was patch unlocked ... means the phone is unlocked by patching the Main

since u flashed in a fresh main u can't do anything

You must flash it to w610 and then get it patch unlocked by people who can do it !! this way u can flash your phone to w610i !! this is bad
its going to cost you 15 pounds again i guess

and what's up with k550 menu original.. its got nothing to do with this problem !
 

50pounds

Broken In
a_k_s_h_a_y said:
well sorry i verified it.. now
your phone was patch unlocked ... means the phone is unlocked by patching the Main

since u flashed in a fresh main u can't do anything

You must flash it to w610 and then get it patch unlocked by people who can do it !! this way u can flash your phone to w610i !! this is bad
its going to cost you 15 pounds again i guess

and what's up with k550 menu original.. its got nothing to do with this problem !

oh fcuk so cant settool do tis if i get a log? thanks for your replys
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
^^ yes am sorry for you

u know i should have included a warning for people having locked phones
but i did not do it because it would scare people from Rest of the world because locked phones are sold only in EUROPE i suppose

in ASIA no locked phones are sold !

If SeTool 2 can perform patch unlock then go for it !

you will get complete support in SeTool 2 Forum !! Just talk to people there !
all the best


this is the SeTool 2 forum ! run by the_laser

*www.setool.org/forum/
 

50pounds

Broken In
a_k_s_h_a_y said:
^^ yes am sorry for you

u know i should have included a warning for people having locked phones
but i did not do it because it would scare people from Rest of the world because locked phones are sold only in EUROPE i suppose

in ASIA no locked phones are sold !

If SeTool 2 can perform patch unlock then go for it !

you will get complete support in SeTool 2 Forum !! Just talk to people there !
all the best


this is the SeTool 2 forum ! run by the_laser


*www.setool.org/forum/


bugger ill try get it unlocked from this then see what happens :) thanks tho good tut btw wish it never locked my mobile tho hehe ill let u know how i get on :)
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
yeah all the best !!
hv fun and wish you success !

had u paid 50 pounds to unlock it or what ?? or 15 ??
as i see you have username as 50 pounds !
 

50pounds

Broken In
a_k_s_h_a_y said:
yeah all the best !!
hv fun and wish you success !

had u paid 50 pounds to unlock it or what ?? or 15 ??
as i see you have username as 50 pounds !

payed £15 ages ago from a mobile shop down my town would be great if there was a free way to unlock this phone it costs all money nowadays lol my nickname for everyforum =50pounds ;) kinder a ripof to 50cent hehe

oh btw can i use this cable to unlock this phone the one im using to flash it with?? cos i cant seem to find the program to unlock it then ill buy a log u see doing my head in now lol

a big problem i did something wrong i tryed to right now i have a dead phone wont turn on or anyting

i used the GDFS thingy but put the wrong on in and writeing it to the phone i used

W810_35906200xxxxxx_GDFS_BACKUP

instead of K550_35489301xxxxxx_GDFS_BACKUP

what can i do ??? crys
 
Last edited:
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
that's real bad.. flashin correct GDFS with XS++
or does the redlight blink ???

severe damage to phone man.... see if XS++ can identify it and flashing in new GDFS...

come to msn......msn id is every_one_says@iamcrazy.in

but my mom is calling for dinner ..
also today here we have very big festival like christmas in england

its called diwali .. the festival of lights
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
but in first place why did u write that GDFS phone
i had warned that writing wrong GDFS will kill the phone severely

if phone is not turning on completely then very good... u can get it replaced from those dumb guys are service center... incase we are unable to fix that phone
 

50pounds

Broken In
okay phone totaly dead now 23:37:28|


23:37:28| TURN OFF PHONE!


23:37:28| Hold 'C' button on phone and connect phone NOW.


23:37:28| You have 30 seconds...


23:37:28|


23:37:34| Baseband ID: 9900


23:37:34| DB2020


23:37:34| Protocol Version: 3.1

thats what it says on XS++

oh god please help my phone
 

semaj

Broken In
@ 50pounds... sorry to here about your phone!!! I hope something can be done...

@ akshay... still no luck with the play now icon... I was playing with my phone yesterday with the original play now icon and the rest of the icons are urban icons... at first I turned off the phone and restart after 3 seconds... still the same play now icon... (I was hoping for an icon reset)... then I again turn off the phone this time removing the battery, then insert it back & turned on the phone... Guess what?! ... Menu icons are back to the default SE Icons... Hehe...

I think removing battery is some sort of software reset.... I'll again flash shortcuts without battery removal... I'll post results later...
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
50pounds said:
okay phone totaly dead now 23:37:28|
23:37:28| TURN OFF PHONE!
23:37:28| Hold 'C' button on phone and connect phone NOW.
23:37:28| You have 30 seconds...
23:37:28|
23:37:34| Baseband ID: 9900
23:37:34| DB2020
23:37:34| Protocol Version: 3.1

thats what it says on XS++

oh god please help my phone
thanks to god it connects to XS++ atleast... some times it won't even connect at all
try to write back original GDFS of your phone using SeTool 2 lite .. hopefully that works...

btw did u put your help request to revive your phone in SEtool 2 forum
i guess laser will have a solution for your phone

A service cable can surely fix your phone ... i suppose
because one guy reversedhex fixed his dead k550i using service cable

what about redlight.. i hope that does not blink !!
if it does not then very good.. EROM Is in good condition then just write back GDFS with service cable ! like curiser cable.. i don't much about this.. ask number1 about it ...!

hey now connect phone to SeTool 2 lite holding 2 + 5 ( not C ) then write back original GDFS
try the same with XS++ 3.0 !! all with your DCU 60 Cable !!



semaj said:
@ 50pounds... sorry to here about your phone!!! I hope something can be done...

@ akshay... still no luck with the play now icon... I was playing with my phone yesterday with the original play now icon and the rest of the icons are urban icons... at first I turned off the phone and restart after 3 seconds... still the same play now icon... (I was hoping for an icon reset)... then I again turn off the phone this time removing the battery, then insert it back & turned on the phone... Guess what?! ... Menu icons are back to the default SE Icons... Hehe...

I think removing battery is some sort of software reset.... I'll again flash shortcuts without battery removal... I'll post results later...

lol i am not getting what is happening there...

hey follow this ok

download w610i custom menu form the esnips folder akmenu

then put this menu in live folder and restart phone also don't forget to put urban icons in that live folder

btw which phone ? k550 or k550@w610 ??

if u have k550 then use k550 custom menu from esnips folder akmenu


i hope you are using shortcut method !! its soo easy
to use shortcut method

first create that live folder in other >> menu >> live

put all icons and w610 or k550 custom menu ml in there

then using far or xs++ delete menu ml from phone fs

don't start phone

Copy all 25 shortcuts ( those 25 @ files ) to the menu folder in FS

start phone.. this way everything goes correct !
 
Last edited:

semaj

Broken In
a_k_s_h_a_y said:
lol i am not getting what is happening there...

hey follow this ok

download w610i custom menu form the esnips folder akmenu

then put this menu in live folder and restart phone also don't forget to put urban icons in that live folder

btw which phone ? k550 or k550@w610 ??

if u have k550 then use k550 custom menu from esnips folder akmenu


i hope you are using shortcut method !! its soo easy
to use shortcut method

first create that live folder in other >> menu >> live

put all icons and w610 or k550 custom menu ml in there

then using far or xs++ delete menu ml from phone fs

don't start phone

Copy all 25 shortcuts ( those 25 @ files ) to the menu folder in FS

start phone.. this way everything goes correct !

Yes I followed everything, I'm also using the shortcuts... when I change the icons in the live folder menu icons are replaced... but again the original play now icon is displayed... hopelesss I think!

but luckily I found the solution!!! heres what I did:
I opened the menu.ml in notepad I noticed that there are 2 options for Icon1... the first option is:

<element lock="icons" id="PlayNow" replace="next">
<label type="name" textid="DIL_PRE_PLAY_LINK_TXT" />
<icon pos="unselected" source="internal">PREPLAY_DESKTOP_ICN</icon>
<icon pos="selected" source="internal">PREPLAY_DESKTOP_SELECTED_ICN</icon>


the second is:

<element lock="icons" id="OperatorWebPage">
<label type="name" textid="SONYERICSSON_TXT" />
<icon pos="unselected" source="file">icon1_unselected.png</icon>
<icon pos="selected" source="file">icon1_selected.png</icon>


apparently my phone has no internet settings yet so my phone is using the original play now icon from the internal source... but if you have internet settings already then the phone uses the custom icon from the file source...

with this I edited the the first option source from "internal" to "file" and "PREPLAY_DESKTOP_ICN" to "icon1_unselected.png", then same goes to the selected....

I loaded it to the live folder... and there it goes... its all ok now....

heres the edited menu.ml file....
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
oops sorry .. yes its a mistake that i made

only for operator logo i changed it to icon1_selected !

for play now i had not done that ..!! i guess u set it correct
hehe lol.. thanks !!

for playnow it was still set to use original icons as u can see in the menu ml that i had uploaded
good work ...!!

but stilll i have a doubt .... you have w610 or k550 ??
 

50pounds

Broken In
a_k_s_h_a_y said:
thanks to god it connects to XS++ atleast... some times it won't even connect at all
try to write back original GDFS of your phone using SeTool 2 lite .. hopefully that works...

btw did u put your help request to revive your phone in SEtool 2 forum
i guess laser will have a solution for your phone

A service cable can surely fix your phone ... i suppose
because one guy reversedhex fixed his dead k550i using service cable

what about redlight.. i hope that does not blink !!
if it does not then very good.. EROM Is in good condition then just write back GDFS with service cable ! like curiser cable.. i don't much about this.. ask number1 about it ...!

hey now connect phone to SeTool 2 lite holding 2 + 5 ( not C ) then write back original GDFS
try the same with XS++ 3.0 !! all with your DCU 60 Cable !!



hey mate no it dont let me flash the gdfs wont work at all here what the logs says

xs++

10:42:22| XS++ v3.0 beta (Sinyar) Ready !

10:42:22| Executed on Microsoft Windows Vista

10:42:47|

10:42:47| Attempting to open the interface...

10:42:47|

10:42:47| TURN OFF PHONE!

10:42:47| Hold 'C' button on phone and connect phone NOW.

10:42:47| You have 30 seconds...

10:42:47|

10:42:57| Baseband ID: 9900

10:42:57| DB2020

10:42:57| Protocol Version: 3.1


now setoollite

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
phone pre-boot failed,possible RECOVERY needed.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:50 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489301310578 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:29 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:75 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35489301310578 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:12 secs.


okay there is NO red light blinking at the top nothing in fact the red light comes on when i charge it but then goes away after a short while

okay if this cable dont work what ype of cable do i need??

would this 1 work? - *www.mobilefun.co.uk/product/8609.htm

also i downloaded SEMCtool_v8.4_FREE and it dont work with vista :(

what should i do lol?!?!
thanks for help and replys
 
Top Bottom