Tutorial: Flashing k550i to w610i !!

phuchungbhutia

Om Ma Ni Pä Me Hum
its w700 i had posted same prob in this thread but no answer ....
*www.thinkdigit.com/forum/showthread.php?t=54672&page=5

i had flashed with vkp files ... it must have cause the prob ...
the menu which comes after swithing on ... flight mode option ...
phone > ... i get prob here ... error ..... get signal but no call or menu ....
music > ... plays media

wil try with reflash if possible ....
get back to u later if prob persists ..
 

harrycool007

Right off the assembly line
a_k_s_h_a_y said:
where did u find it out ? plzz lets us all know it !

loud acoustics push the back speaker to its extreme....!!
am worried a bit of the vibrations it sends through out the phone...

i don't use them....coz i don't like loud stuff.

At iprotebe only!!!

But today I don't know what happened, after trying a couple of cam drivers, the w800's cam application stopped working... I tried earlier cam driver but still didn't work... Just now I downloaded the XS++ 2.0 and it gets hanged in the middle... Too much of problems...

Any help????
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
harrycool007 said:
At iprotebe only!!!

But today I don't know what happened, after trying a couple of cam drivers, the w800's cam application stopped working... I tried earlier cam driver but still didn't work... Just now I downloaded the XS++ 2.0 and it gets hanged in the middle... Too much of problems...

Any help????
hmm from did w800 come into action now.......
in such a case where such big problems occour like no camera working then just reflash entire FS and Main !!!!

don't use XS++ v 2.0 ! released but its still beta testing.. and gbrooks is giving it its finishing touches..
1.6.8 has been tested lots of times and you used it ?? it works right ??

XS++ hangs in between and your phone is still alive.. that is great news !!
please tell me more about this.....explain ...
what error does XS++ gives when it hangs...
and what messages it throws out when you try to interrupt it or shut it down !!!

hey can u plzz get the XS++ 2.0 logs
it will be very help ful !
 
Last edited:

phuchungbhutia

Om Ma Ni Pä Me Hum
what do u mean by reflash ....
1. is it SEUS....SEUS download installed then it downloads application updates which took more that 1hr and now its checking for updates ... howw long will it take
2. or is it flashing with main.mbn or fs.fbn
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
phuchungbhutia said:
what do u mean by reflash ....
1. is it SEUS....SEUS download installed then it downloads application updates which took more that 1hr and now its checking for updates ... howw long will it take
2. or is it flashing with main.mbn or fs.fbn

u can go for any method..

just flash .mbn and then fs.fbn this will also do
 

harrycool007

Right off the assembly line
a_k_s_h_a_y said:
hmm from did w800 come into action now.......
in such a case where such big problems occour like no camera working then just reflash entire FS and Main !!!!

don't use XS++ v 2.0 ! released but its still beta testing.. and gbrooks is giving it its finishing touches..
1.6.8 has been tested lots of times and you used it ?? it works right ??

XS++ hangs in between and your phone is still alive.. that is great news !!
please tell me more about this.....explain ...
what error does XS++ gives when it hangs...
and what messages it throws out when you try to interrupt it or shut it down !!!

hey can u plzz get the XS++ 2.0 logs
it will be very help ful !

Thanks!!! I flashed the FS from iprotebe and everything works now... Well originally I wanted to modify my dad's K550, but later my brother who has a W800 insisted that I do something abt it too... So I just tried Camdrivers given at esato forums...:)

I went back to XS++ 1.6.8 and yes it did worked...

Following is what I got from v2.0:

18:21:15| XS++ v2.0 Ready !
18:21:15| Executed on Microsoft Windows Vista
18:21:22|
18:21:22| Attempting to open the interface...
18:21:22|
18:21:22| Turn off phone
18:21:22| Hold 'C' button on phone and connect phone.
18:21:22| You have 30 seconds.
18:21:22|
18:21:26| Baseband ID: 8040
18:21:26| Hardware Platform: DB2010 Marita compact
18:21:26| Protocol Version: 3.1
18:21:26|
18:21:26| Sending db2010_cid00_prodid_p3l.bin...
18:21:26| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
18:21:26| This is a PRODUCTION_ID loader
18:21:26| Activating GDFS...
18:21:26| Phone name detected!
18:21:26|
18:21:26| Sending db2010_cid36red_flash_r2ab.bin...
18:21:27| Applet ID: 050425 0904 MATCXC1326738_COMPACTFLASHLOADER R2AB
18:21:27| This is a FLASH loader
18:21:27|
18:21:27| Profiling SEMC phone...
18:21:27| Baseband ID: DB2010
18:21:27| OTP CID: 36
18:21:27| EROM CID: 36
18:21:27| EROM Color: Red
18:21:27| IMEI: 35682900xxxxxx
18:21:27| Phone ID: W800
18:21:27| Network: APAC_1
18:21:27| CDA: CDA102430/101 R3A
18:21:27| Firmware Version: R1BC002
18:21:27| EROM: n/a
18:21:27| Ready for operation!
18:21:30| AUTO CID36 BREAKIN
18:21:38|
18:21:38| Sending db2010_cid00_prodid_r2f.bin...
18:21:38| Applet ID: 050404 1011 LLECXC125872_COMPACTPRODUCTION_ID_LOADER R2F
18:21:38| This is a PRODUCTION_ID loader
18:21:38|
18:21:38| Sending db2010_cid00_cert_r2e.bin...
18:21:38| Applet ID: 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E
18:21:38| This is a CERTIFICATE loader
18:21:38| Bypassing RSA...
18:21:38| Waiting for hello...
18:21:38|
18:21:38| Sending db2010_cid00_hack_cs_v23.bin...
18:21:40| Applet ID: 060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
18:21:40| This is a CHIPSELECT loader
18:21:40| Activating loader...
18:21:40| Activating GDFS...
18:21:41| This loader is UNLOCKED
18:21:41| Sucess! CS-loader has been unlocked! (This is where it hanged and nothing happens after that)

After I clicked on disconnect:
18:21:57| Error: FSX failed
18:21:57| Disconnected... Unplug the phone

Does this helps Akshay???
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
^^ hey thanks..
it might be a bug in XS++ v2.0
it might have been fixed in new release of XS++ 2.0
or as always it can be cable lost connection
 

harrycool007

Right off the assembly line
Has there been a new release of XS++ v2 in the last 2 days??? That's because I tried it 2 days back only... And I can say that the connection was not lost as I tried atleast 10 times and it hanged at the same place everytime...:D
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
harrycool007 said:
Has there been a new release of XS++ v2 in the last 2 days??? That's because I tried it 2 days back only... And I can say that the connection was not lost as I tried atleast 10 times and it hanged at the same place everytime...:D


hey yes the FSX problem was fixed !! and again released...
 

digitizen

Journeyman
@akshay my s500i suddenly switched off and not swithcing on again . when i tried switching it on the led at the side just blinks . i cant even take it to the service centre because i flashed it with w580i software . what can i do ?
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
digitizen said:
@akshay my s500i suddenly switched off and not swithcing on again . when i tried switching it on the led at the side just blinks . i cant even take it to the service centre because i flashed it with w580i software . what can i do ?
oh god.. not that problem...
was this the first time u switched it off ??
or the first time it got switched off ??

and if u take that phone to service center then there are high chances that u might get replacement... i hope luck favours u..
atleast a guy in europe got replacement for same problem....for w580i..
he flashed his w580i with mostly the latest Main that u used i suppose..

tell me which version of Main and FS u used ??

try to flash it using Sony Ericsson Update Service..
i mean try to update it.. and u get clear instructions

then try connecting it to XS++ and give me its log let me see it..
i will ask other ppl also.. who have flashed s500i to w580i

its got something to do with EROM problems in w580i and s500i and with that latest main R6bc002..

and don't worry abt service center guys.. they will fix to for free mostly..
because they can't start the phone to see that u flashed to w580i...
in case they got to know u simply tell u did nothing but only update phone using SEUS... !
 
Last edited:
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
don't know you have to try...
what else did u try now ??
that phone w580i has some problems...

does XS++ detect it ?? and what about SEUS did u try it out ??
 

digitizen

Journeyman
nothing its not switching at all ... and not connecting with xs++

what if they void warranty telling that i flashed my phone ..
 
Last edited:
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
which city do u live in ???
warranty does go void.. but most of times it does not... they will fix it for free...

just goto service center and behave as though u don't know what happened...
u tell them that phone all of a sudden got shut down..
if they ask anything u tell u don't know.. just tell all u did was update your phone with SEUS..

they will reflash with their software and fix it.. or give replacement.. mostly...
incase they know about flashing of w580i which i think is unlikely then also they might fix for free.. it all depends on the service centre...
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
chennai that's very good...
goto a pretty descent service center...
don't goto a high end or a low end service center... goto to something in between... !

mean while i will see what can be done.. ! why does that prob occurs..!
 
OP
a_k_s_h_a_y

a_k_s_h_a_y

Dreaming
hey digitzen one of the fellow on se-nse suggest recharge battery
i don't know if this might work..sounds trivial..give it a try.. lets hope for more replies from people who faced this same problem..
i hv posted it on se-nse.. lets see.. !!

try using a friends battery..

hey u hv another phone right ?? mean while to use.. to sms and make calls ??
 

vish786

"The Gentleman"
@akshay, does k550i have 3 speakers like w810i ? and is sound also same in k550i....

did u find any difference in both phones ?
 
Top Bottom