1. Hey Guest Did you know you can win an Honor 10 phone worth ₹33,000 and an additional ₹70,000 in paytm vouchers, just by replying to some threads and taking part in the discussions happening in the Honor Hub?

    What are you waiting for? Start commenting and start winning! Remember to read the instructions posted here.

    Dismiss Notice

Rear Panel Audio Sys

Discussion in 'Audio' started by rbp45, Aug 12, 2011.

  1. rbp45

    rbp45 New Member

    Joined:
    Mar 18, 2011
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    0
    My MOBO is ASUS M4A88TD-M EVO/USB3, There is 7 audio interface port to connect, as shown below

    [​IMG]

    1) Now I want to know which Brand/model speaker is supported Optical S/PDIF_OUT PORT.
    2) Which Brand/model speaker for 6, 7, 8, 9, 10, port ? I mean speaker direct connect to MOBO rear port, not through Ampelefire. Is there audio sys to connect these port without amp ?
    As per MOBO's Manual
    6 for Center/ Subwoofer
    7 for Rear speaker
    8 for line in port
    9 for line out port
    10 for microphone

    My actual quasion is here
    Suppose a 5.1 speaker set connection from rear of MOBO, first I connect subwoofer to no.6 port, rear speaker for no.7 port, but there is onther problem generally 2 speaker for rear, how can I use this single port for 2 rear speaker ? Than how to connect other speaker ?
    If it is not for these connections than why mnf of MOBO given these port e.g. no.6 for subwoofer ?

    My current speaker Logitech Z623 is from no.9 port & working wel.
     
    Last edited: Aug 12, 2011
  2. MegaMind

    MegaMind Active Member

    Joined:
    Nov 14, 2010
    Messages:
    3,254
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Tirunelveli
  3. OP
    OP
    rbp45

    rbp45 New Member

    Joined:
    Mar 18, 2011
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    0


    As per my MOBO manual, no.2 port for s/pdif. Now advice me from Your experience that, which band/model speaker can interface this port.


    Normal way- no.9 (lime) port using for P/C speaker (2.1 , 5.1 etc). These speaker contains inbuild Amplifire, and from that Amplifire connect to sub & mid.
    But many MOBO have 7 Audio-port including S/PDIF and their manual say's that no.6 for subwoofer, no.7 for rear speaker. Now can you say which Band and model speaker 'plug & play' from these 6 & 7 port ? Also I want to know that from where I will connect front speaker ? In manual no.11 port for side speaker. Is it mean front speaker ?
     
    Last edited: Aug 13, 2011
  4. mithun_mrg

    mithun_mrg Active Member

    Joined:
    Oct 1, 2003
    Messages:
    1,339
    Likes Received:
    11
    Trophy Points:
    38
    Location:
    Assam
    6& 7 no. ports are sub & rear output resp. ideally if u plugin a 5.1 speaker u use the 9,6&7 for front,sub & rear output resp. if u use 2.1 then 9 only & port 11 is used for 7.1 setup side speakers 8 & 10 r line in & microphone resp.
     
  5. MegaMind

    MegaMind Active Member

    Joined:
    Nov 14, 2010
    Messages:
    3,254
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Tirunelveli
    The Logitech Z-5500 has both digital optical and coaxial inputs..

    [​IMG]

    [​IMG]

    Connecting 2.1/headphone :
    Use port 9, select stereo/headphone in audio control panel.

    Connecting 4.0/4.1 :
    Use port 9 as front & port 7 as rear, select 4 channel in audio control panel.

    Connecting, 5.1 :
    Use port 9 as front, port 6 as centre+sub & port 7 as rear, select 6 channel in audio control panel.

    Connecting, 7.1 :
    Use port 9 as front, port 6 as centre+sub, port 11 as side speaker & port 7 as rear, select 8 channel in audio control panel.

    I hope u got it... :)
     
  6. OP
    OP
    rbp45

    rbp45 New Member

    Joined:
    Mar 18, 2011
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    0
    Many-Many Thanks to YOU for your instruction with image.

    Now I want to connect Acoustimass® 3 Series IV Stereo Speaker 2.1 System (Acoustimass® 3 Series IV Stereo Speaker System)

    According to your instruction I have to connect 2 front speaker for port no.9 but how can I use 2 speaker in single port ? For sub no problem if I connect to port no.6 .
    These speaker not inbuild Amplifire like my Logitech Z623 , will this Acoustimass® 3 work from MOBO ? If work than how much rms(watt) can deliver ?
     
    Last edited: Aug 13, 2011
  7. MegaMind

    MegaMind Active Member

    Joined:
    Nov 14, 2010
    Messages:
    3,254
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Tirunelveli
    U should add a Receiver for Acoustimass 3 ...
     

Share This Page