Rapidshare Hourly Wait Bypass 100 % Tested

[amrendrasinha_2002]

Hi
Here is the solution for Rapidshare hourly wait.
It works for IP address that changes automatically, not for static IP Address.
I have an Airtel Broadband connection with Dial-up modem.
100% tested.
Working properly..........


First go to Tools>Internet Options>Privacy>Sites.
Type *rapidshare.de and block it.
*www.rapidshare.com and block it.

It will block all cookies from rapidshare.


When you get hourly wait in rapidhare, just disconnect and connect it again your internet connection.Refrtesh the webpage that says hourly wait.
Yes, you get the download options again.....
Start downloading..........

 

[Krazzy Warrior]

Just trying wait a min.

 

[kumarmohit]

age old and here on MTNL, you need not even bother about cookies tho I do not think cookies and ISP have any link in this regard

 

[xbonez]

isn't this just based on dynamic IP?

 

[dheeraj_kumar]

Yeah, you dont need to worry about cookies at all. Just disconnect and reconnect and you're ready to download another file.

 

[Sathish]

ooooppppppppsssss......... these types of tricks only for dial up connection..
i have BSNL Data one ..
i searched for some of tricks to bypass time delay.. But none of the tricks were not working...
Any idea....?

 

[xbonez]

it works only if u have dynamic IP

 

[Sathish]

it works only if u have dynamic IP

Hey,, i tried with both static and dynamic.. but no use...

If you are BsNL Dataone subscriber, plzz tell me as step by step....

 

[yesh1683]

I am using dataone
and by Just disconnecting and connecting again will bypasses rapidshare limits
thats bcos dataone acquires new ip address each time we connect


​

 

[eggman]

Old Tut
Wont work!!

 

[Ramakrishnan]

It sometimes work and sometimes don't. In that case disconnect and connect again. I am using BSNL BB and it works quite ok.

 

[maxy69]

Hey,, i tried with both static and dynamic.. but no use...

If you are BsNL Dataone subscriber, plzz tell me as step by step....

if u really need it step by step here u go>>>

1. use firefox go to options privacy and choose keep cookies untill i close firefox.
2. bookmark whatever or how many files u want to download.
3. after downloading one file and seeing more than 30 min waiting time for 2nd file, jst stop there and close ur browser.
4. switch off ur modem or router and wait at least 10 sec and switch it on.
5. click on the bookmarked link and here u go for another download....
and if you still get the same problem ask ur provider to give u dynamic ip address as the might have give u static 1 may be because of your plan or someting.
As this is the only way till now wihout any software.

 

[napster007]

it works only if u have dynamic IP

Actually that's incorrect...i have an Static IP and it still works if i disconnect and connect again

 

[Indyan]

I have dataone and all I need to do is disconnect and then reconnect.

 

[Abhishek Dwivedi]

I have dataone and all I need to do is disconnect and then reconnect.

works for me too

 

[xbonez]

Actually that's incorrect...i have an Static IP and it still works if i disconnect and connect again

no, thats coz ur internal IP is static but your external IP is dynamic

 

[maxy69]

no, thats coz ur internal IP is static but your external IP is dynamic

yeah totally agree with u bro.........!!!! for napster007 go to *www.knowmyip.com/ this might clear your views abt u....

 

[Sathish]

Hi guys..
All are confusing me..

My configuration is as follows..

(as instructed by DataOne Tech Engineer)
Internal IP address in NIC

IP addresss/subnetmask/default gatewey = 192.168.1.6 / 255.255.255.0/192.168.1.1.
DNS address / Preferred/altranate =192.168.1.1 /

External IP Addresse in Router
Board ID: 96338L-2M-8M Software Version: 3.08.BSNL_02.01.02_tr64. Bootloader (CFE) Version: 1.0.37-8.7 Firmware Version: UT300R2U.0011.01 Hardware Version: UT300R2U 2.2 Model Name: UT300R2U current status of your DSL connection.(these setting never changed even i reboot the router)

Line Rate - Upstream (Kbps):767Line Rate - Downstream (Kbps):7996 LAN IP Address: 192.168.1.1 Default Gateway: 117.193.160.1 Primary DNS Server: 218.248.255.146 Secondary DNS Server: 218.248.255.139

All your tricks are not working me.......

any idea about the settings....

 

[NucleusKore]

You don't have to do any circus, just switch off the router, wait for five seconds, switch on the router.

 

[maxy69]

Hi guys..
All are confusing me..

My configuration is as follows..

(as instructed by DataOne Tech Engineer)
Internal IP address in NIC

IP addresss/subnetmask/default gatewey = 192.168.1.6 / 255.255.255.0/192.168.1.1.
DNS address / Preferred/altranate =192.168.1.1 /

External IP Addresse in Router
Board ID: 96338L-2M-8M Software Version: 3.08.BSNL_02.01.02_tr64. Bootloader (CFE) Version: 1.0.37-8.7 Firmware Version: UT300R2U.0011.01 Hardware Version: UT300R2U 2.2 Model Name: UT300R2U current status of your DSL connection.(these setting never changed even i reboot the router)

Line Rate - Upstream (Kbps):767Line Rate - Downstream (Kbps):7996 LAN IP Address: 192.168.1.1 Default Gateway: 117.193.160.1 Primary DNS Server: 218.248.255.146 Secondary DNS Server: 218.248.255.139

All your tricks are not working me.......

any idea about the settings....

as u said this is static ip that is why u cant do it. the simple thing is to call ur tech eng and tell him to give u dynamic add.

or else u can try it for urself by going to the settings of ur connections , properties and select automatic ip or dynamic ip (not sure of path coz on linux rit now).