Project help (port programming )

[saurabh kakkar]

i have made a infrared reciver for computer as part of my project

currently i am using pre build software for testing nd controling but

i need to build a software to contol its functionality and that to in VC++

my Ir device is connected to computer via DB9 female connector and

all i know is that i have to do port programing for controlling it

but i dont know a single command of port programming and VC++ i know C++

plz provide any site any book and help plz

 

[saurabh kakkar]

bump ................

sorry for late response i was very busy

some one plz help

 

[RCuber]

Check if this helps Link

 

[gary4gar]

No software pantents!


What is LIRC ?

LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls.

Former versions focussed on home-brew hardware connected to the serial or parallel port. Descriptions how to build this hardware can be found here. Current versions of LIRC also support a variety of other hardware. An up-to-date list of all supported devices and the status of the according drivers is available on the left.

*www.lirc.org/

WinLIRC allows you to transmit and receive standard infrared remote control signals. This allows you to control your computer using almost any standard infrared remote control. It also allows your computer to control other equipment which uses these signals (stereo equipment).

WinLIRC is the Windows equivalent of LIRC, the Linux Infrared Remote Control program. WinLIRC (through version 0.6) was originally written by Jim Paris. Later releases are written and maintained on sourceforge.

*winlirc.sourceforge.net/



Both projects are open source so you see the code & modify it to your own needs

 

[saurabh kakkar]

@Charan : Thanks for the link this link will help me lot any further

sugessions ?

@gary4gar : thanks for this valuable info i want something like this

but i m not able to understand any coding any help in this respect ?

 

[gary4gar]

@Charan : Thanks for the link this link will help me lot any further

sugessions ?

@gary4gar : thanks for this valuable info i want something like this

but i m not able to understand any coding any help in this respect ?

Frankly i don't much of coding so can't help
so you have to wait for others around