P5B Deluxe WiFi-AP

Status
Not open for further replies.
Pathik

Pathik

Google Bot
1>P5B DLX has ATI crossfire support....No use if you plan an nvidia card
-NO USE FOR ME
2>has dual gigabit lan.......does not make much difference if you ask me
-NO USE TO ME
3>has 8 SATA ports.....VM has 10 I guess
EVEN 4 ll DO FOR ME
4>has heatsink over the MOSFETS...THAT is the major advantage, the board runs less hot.....
THATS A GOOD ADVANTAGE FOR OCING...
but still i ll go for the p5b dlx cos all 3 of u hav it.. :p
also i ll save arnd 2k if i go for the p5b dlx instead of the deluxe wifi ap.... rite??
and the only dioff between the two is wifi support na??
 
H

hitman050

Journeyman
I am also looking for a mobo. Can anyone tell me where exactly I would like to use wi-fi? Since if its no use to me, I will get P5B Deluxe and save myself some money.
 
darklord

darklord

Cyborg Agent
sam9s said:
I am running vcore at 1.38. How come you have so good Idle temps at 24-25. My Idle temp in this Delhi heat is 56-57(sometimes 60 as well)@ 3.304. Are u using a cooling solution or is Durgapur not that hot......
Click to expand...
Well here i am again :D
I am aware that you hate me like anything and would probably like to kill me but then hardware is my weak point and i cant keep my mouth shut so here i go :p

Dude those temps are scary,especially considering that they are at idle.Back down on the OC re,its not worth it.Your chip will be harmed in the long run.:(

Also C2D itself is sooo fast that even at stock its enough.So why not use it at say 2.8 or so till you manage to get a decent cooler or reduce your temps ? Its for the goodof your chip :)

This is a genuine suggestion,dont come charging at me :D
 
OP
assasin

assasin

Banned
@darklord wats ur temps @ 3GHz after u got that water cooling?
do u think i need to scale down my proccy to anything below 3GHz?
Idle - 24-25
load - 45-48
 
R

ranjan2001

Cyborg Agent
@darklord wats ur temps @ 3GHz after u got that water cooling?
do u think i need to scale down my proccy to anything below 3GHz?
Idle - 24-25
load - 45-48
Click to expand...
Assasin
Ur cpu temp (24-25C) are below ur ambient room temp(35-38C), how is that possible???
 
Last edited:
Pathik

Pathik

Google Bot
yup assasin is that a typo or what?? Btw i just enquired p5b vm is 7.8k and p5b dlx is 10k.. So its p5b dlx 4 me..
 
OP
assasin

assasin

Banned
ranjan2001 said:
Assasin
Ur cpu temp (24-25C) are below ur ambient room temp(35-38C), how is that possible???
Click to expand...

just check this out and u'll get an idea:

*img358.imageshack.us/img358/7545/untitledft0.jpg*imageshack.us
 
R

ranjan2001

Cyborg Agent
assasin said:
just check this out and u'll get an idea:

*img358.imageshack.us/img358/7545/untitledft0.jpg
Click to expand...
Ok that shows ur temp but few questions as I am in bad need of getting my cpu temp down.

1.ur system fan shows as 5400 rpm, what fan is it with such high speed? can u post pix of ur cabinet/psu/fit mobo & other setup.

2. speedfan may be showing you wrong temp reading or the sensors are messed up asI have never seen temp below than the ambient reading.....................not that I am disputing ur reading but I need to cool down my system as urs if I can.

3. Ur main CPU is at 25C & then the core 0 is 32C & core 1is 33C which is unusual as both the core should be around 25-26 then..................hence my doubt that the sensors are giving u wrong readings................or VISTA may be running cooler than XP can u check it with everest or using TAT.

Either u have got some excelent cooling or something is wrong or, hope u can help me to pinpoint the problem & bring down my temp from 56C to same as urs around 35C
 
Last edited:
deathvirus_me

deathvirus_me

Wise Old Owl
assasin said:
just check this out and u'll get an idea:

*img358.imageshack.us/img358/7545/untitledft0.jpg*imageshack.us
Click to expand...

I see the core's running at 32c,33c respectively ... lol .. use other apps. like CoreTemp of Everest ... no way u can get to <30 on air with that oc ..
 
darklord

darklord

Cyborg Agent
Another thing, have you enabled speedstep and thermal control thing ???

That might be causing that too.Please check.

@ Sam :D
Good to see peace prevail ! Good for both of us :D

@ Assassin,
My temps after Water -
24C Idle @ 3GHz,
Orthos Run Temp = 42C.
When this was done, Temperatures here were around 40C.
 
OP
assasin

assasin

Banned
ok.temps thru everest posted:

*img512.imageshack.us/img512/6029/untitledjf8.jpg

@darklord yes i've enabled Intel SpeedStep,but i've disable Qfan.

@ranjan2001 the fan which shows 5400rpm is a Intel original proccy fan from very old Intel hsf which i've fitted on top of the SB heatsink.
 
R

ranjan2001

Cyborg Agent
Awesome man , u have a perfect mirror finish between ur processor & IHF. Congrats & enjoy the cool cool thing, U can easily OC to 3.6Ghz with this.

Where in BIOS do u enabled Intel SpeedStep, I have P5b too but havent seen this in bios menu.
What does it do?
 
OP
assasin

assasin

Banned
@ranjan2001 u can get Intel SpeedStep in the CPU settings.
if u enable that then d OS will automatically decs the multiplier to the lowest value if ur proccy is not being utilized fully.
as far as pics of my setup is concerned i'll post pics within a few days as i'll be out of station for a few days from tomorrow.
my psu is a HP 250W psu.
i've bios version 1101 and i get SpeedStep option.hope this helps u reducing ur temps and i dont plan to oc over 3GHz.
 
R

ranjan2001

Cyborg Agent
Sam where do I find speedstep menu?

OK I found that it needsto be scrolled down in that menu else it remains hidden on my screen.
In my case its already enabled................so what else do I doo to get that temp.
I am now thinking lapping is the only way, since its well established that its a problem with IHS
 
Last edited:
R

ranjan2001

Cyborg Agent
assasin said:
@ranjan2001 wat temps do u get if u run @ 3GHz and 1.25vCore?
Click to expand...

I last tried was 3.34Ghz @ 1.35vcore stable with orthos & my temp was 68-70C ideal on load it goes 78-83C max, but tahts too much, where as both intel & asus have wrote back to me that these temp are normal................dont worry they both say.

Sam
I have been reading Intel lapping issues & comming to the conclusion that even if I get best of the cooler it still will not solves the issue, since the processor base plate is not perfectly flat & that 1st need to be lapped.

So I am waiting & meanwhie got to know that Thermaright ultra 120 will be available too in indi asoon thsi week, so i can have a choice.
 
Status
Not open for further replies.
Top Bottom