Nero Iso Burn

[jamifahad]

I have 1.6Ghz intel centrino 512MB ram running WinXp Sp2 toshiba laptop.I have Nero7 and when i try to burn .iso image using nero7 it fails to do EndTrack..which eventually leads to error and i end-up with wasted cd.

Following is the log file which nero generated after it failed writing.



5C80001080100000000474189603

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <TOSHIBA DVD-ROM SD-R2512>Version: 1322 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-R2512>Version: 1322 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2512 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2512 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 494MB (506672kB)
Free physical memory: 256MB (262816kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.1.2008
CD Image
11:32:22 AM #1 Text 0 File Burncd.cpp, Line 3048
TOSHIBA DVD-ROM SD-R2512
Buffer underrun protection activated

11:32:23 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 70656KB of Memory

11:32:23 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

11:32:23 AM #4 Text 0 File Writer.cpp, Line 113
Writer E: TOSHIBA DVD-ROM SD-R2512 running

11:32:23 AM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Track-At-Once, using CD-R/RW media

11:32:23 AM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 314949 ( 70:01.24)

11:32:23 AM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

11:32:23 AM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TOSHIBA DVD-ROM SD-R2512

11:32:23 AM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:32:23 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 314950 (314950) = #314950/69:59.25
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 314948 blocks [E: TOSHIBA DVD-ROM SD-R2512]
--------------------------------------------------------------

11:32:23 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TOSHIBA DVD-ROM SD-R2512] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 645324800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
314950 | lead-out | 1 | 0x41 | 0x00

11:32:23 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 314950 -> 314948.

11:32:23 AM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:32:23 AM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

11:32:23 AM #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

11:32:23 AM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

11:32:23 AM #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 24x (3,600 KB/s)

11:32:23 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

11:37:18 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:37:21 AM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x03447200: Len x20

11:37:23 AM #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 2125
Write error
E: TOSHIBA DVD-ROM SD-R2512

11:37:24 AM #22 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 2125
Could not perform EndTrack

11:37:25 AM #23 Text 0 File MMC.cpp, Line 16379
<TOSHIBA DVD-ROM SD-R2512> start Close Session

11:38:01 AM #24 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 24x (3,600 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/8/2007 2:51:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/8/2007 2:51:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

[zyberboy]

First try using another cd(brand).....if that didnt help re-install nero and see.

 

[Net007]

Burn iso image using another burning software like ashampoo burning studio.

 

[Choto Cheeta]

There can be 2 reasons 1st is either hardware fault, which may be the media you are using or ur CD RW drive !!! Second can be the software, Nero is messed up...

So to be sure and locate the problem, use a 2nd application to burn ISO, one free software would be, Active ISO Burner or may be Ashampoo

If they are able to burn then, yeah Nero is the problem source, if they fail, then 1st change the CD media which you are using, buy a better media such as Moserbear or Sony see if that helps... if you still get error, then may be the CD RW drive is faulty contact the company for warrenty support

 

[jamifahad]

thank you very much..i guess nero is messed up.i actually wasted two sony cd trying to burn iso image then i changed both the software and media and it worked.So now i dont know where the problem lies. anyway i used active iso burner and burnt the cd on 16x where nero was burning with 24x.even though my drive support 24x,active burner made 16x as default.
My problem is solved for time being.