Need To Upgrade My RAM...

[rohit2hell]

Hi to All Digitians

I have
AMD Phenom II 955 BE (3.2Ghz)
Asus M4A78T-E Series mothrbord
2X2GB DDR3 Transcend Ram (1333 Mhz)
1 GB HD4870 (MSI graphic card)

i need to upgrade my RAM from 4GB to 8GB - 10GB

which wud be better n Compatible to my Motherboard..??

please help
thnks in advance

 

[mithun_mrg]

ur Mb supports upto 16Gb i.e 4GX4 sticks @1600oc,1333etc since ur currently using 2 sticks of transcend@1333 then it is better to get 2X2Gb or 2X4gb of transend value ram for the max compatibility
Flipkart: Transcend 2 GB DDR3: Ram
if u can post the ss of the memory tab as well as the spd of cpuz then we can confirm

 

[Tarun]

get another pair of 2x2 GB transcend 2 GB DDR3 ram
OR
get g.skill Ripjawx 1600 Mhz CL9 4x2GB (3.2k) if u plan to overclock ur system though i think the transcend 2x2GB should do fine for u buddy i guess 2 GB transcend is for 650 at lamington Rd pretty cheap buy

 

[rohit2hell]

ur Mb supports upto 16Gb i.e 4GX4 sticks @1600oc,1333etc since ur currently using 2 sticks of transcend@1333 then it is better to get 2X2Gb or 2X4gb of transend value ram for the max compatibility
Flipkart: Transcend 2 GB DDR3: Ram
if u can post the ss of the memory tab as well as the spd of cpuz then we can confirm

aaaaaa... ss memory tab..?? dnt know muchh about all these... on the box of RAM its written
JM1333KLU-2G
2GB Memory Module STD
230P DDR3DIMM(256Mx64)
(128Mx8/DDR3-1333/9-9-9)
[7u]


CPU : AMD PhenomII 955BE (3.2Ghz)

Hope this vil help
thnks anyways..

 

[mithun_mrg]

^^ that will do just wanted to know the latency u can get any brand of 1333@9-9-9 will be compatible

 

[Cilus]

If you want my suggestion get a single 4GB 1333 MHz Corsair DDR3 value ram. The Transcend rams you're having are 1333 MHz CL9 rams and I was having one 2 GB module. I think you know your Ram Slots are like A1, A2, B1 and B2. They can be identified from the color scheme used; A1 and A2 will have same color and B1 and B2 will have same color but diff from A1 and A2's color. For better understanding, check the Motherboard guide book. In your case I guess it is read and black.

Now if you need to run them in dual channel, the basic concept is you need to have Total Memory plugged in at A1 + A2 = Total memory plugged in at B1 + B2.

So plug the two 2GB modules in the two red slots (assuming it is A1 and A2), and plug the single 4GB module in one of black slots.

 

[rohit2hell]

Thnks Everyone for helpin me out..!! ^_^