Need Suggesion for Old Components

Revolution

Wise Old Owl
Hi guys,
Some one gave me 5 year old Intel Dual Core CPU+G41 Mobo+2GB DDR2 RAM.
Now I'm thinking to make this as HTPC or may be for Downloading & Browsing machine.
I already have an old iBall case(rust on some parts & got no fan,only a place for 120mm fan at rear) and a Zebronic PSU.
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.
I don't want to spend too much on this.
What should I do ? :-?
 

Naxal

Little Kid
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.

Sorry but is that a problem ?? 55c with intel stock cooler in moderate load is not a big deal, or is it ??
 

akky89

Journeyman
Hi guys,
Some one gave me 5 year old Intel Dual Core CPU+G41 Mobo+2GB DDR2 RAM.
Now I'm thinking to make this as HTPC or may be for Downloading & Browsing machine.
I already have an old iBall case(rust on some parts & got no fan,only a place for 120mm fan at rear) and a Zebronic PSU.
When I install 3 component with PSU in that case and run.
Saw temp at BIOS was 55°C and CPU fan speed was near 2,000RPM.
I don't want to spend too much on this.
What should I do ? :-?

IMO try to clean the heatsink and anyother fan in the chassis and buy TIM paste ....
i think that should solve the problem...
 
OP
Revolution

Revolution

Wise Old Owl
Sorry but is that a problem ?? 55c with intel stock cooler in moderate load is not a big deal, or is it ??

That's what I want to know ?
What's the normal temp should be for Intel E4500 with stalk cooler ?
Is there any cheap TIM available ?
Average price 500/- not less. :(
I need tiny amount of paste only for one CPU.
 
OP
Revolution

Revolution

Wise Old Owl
Any cheap Thermal Paste & Paste Remover Liquid available in market ?
Or,anyone want to sell his/her excess Thermal Paste & Paste Remover ?
I'm from Kolkata.
 
OP
Revolution

Revolution

Wise Old Owl
Cheap ?
May be not for me. :(
Thermal Paste & Liquid Remover will cost near 1K I guess.
Which cheap one u taking about BTW ?
 

acewin

Point Blanc
Buy Arctic Silver | Arctic Silver 5 Thermal Compound

do not know about liquid remover. But I knew they(thermal compound) come in 300 bucks. even 600 is little too much

ok got few of them here
*techshop.in/store/index.php?cPath=320_243_323
 

Neo

.
I had got TIM for Rs 40 from a local retailer, and it is working fine. ;)
Also 55C is absolutely perfect for that configuration.
 

Jripper

Pro/An---tagonist xD
You can try out the coller master thermal fusion 400 :) After unlocking my proccy it too ran at a high temperature. I applied the CM thermal fusion 400 and temps went down to 36-40. Nowadays with the new cabby, temps are 29 degrees on idle :D

It costs just 500 bucks
 
Top Bottom