Need help in port forwarding.

[TechnoBOY]

I'm trying to setup port forwarding in my router (TD-W8951ND).
Have opened port 3000 from router but when checking it via Open Port Check Tool - Port Forwarding Port Check Tool gives me this error (Problem! I could not see your service on xxx.xx.xxx.xx on port (3000).
Reason: Connection refused.)
Any help ?

 

[Desmond]

How did you open the port? You are supposed to set up a virtual server and map the external port to the port on your machine.

Also, if possible, post a screenshot of your router's config page (after redacting sensitive infomation, of course) so that I can see what options exactly are provided.

 

[TechnoBOY]

How did you open the port? You are supposed to set up a virtual server and map the external port to the port on your machine.

Also, if possible, post a screenshot of your router's config page (after redacting sensitive infomation, of course) so that I can see what options exactly are provided.

Just went into NAT >Virtual server.

 

[Desmond]

Is it working?

Sent from my A0001 using Tapatalk

 

[TechnoBOY]

Is it working?

Sent from my A0001 using Tapatalk

no still the same error.
Is there anything to do from pc side?

 

[Desmond]

Is there some application listening on the 3000 port on your PC. If there is no one to respond on that port then you won't get a response.

What exactly are you trying to do BTW?

Sent from my A0001 using Tapatalk

 

[TechnoBOY]

Is there some application listening on the 3000 port on your PC. If there is no one to respond on that port then you won't get a response.

What exactly are you trying to do BTW?

Sent from my A0001 using Tapatalk

Im trying to set up noip so that i can get static ip

 

[Desmond]

I don't remember the noip application requiring port forwarding to work. If you have a noip account, you just login from the application and it automatically updates your machine's IP every few mins.

 

[TechnoBOY]

I don't remember the noip application requiring port forwarding to work. If you have a noip account, you just login from the application and it automatically updates your machine's IP every few mins.

I am trying to get metasploit and beef work on wan..but still not working

- - - Updated - - -

I don't remember the noip application requiring port forwarding to work. If you have a noip account, you just login from the application and it automatically updates your machine's IP every few mins.

Thanks a ton man!!read that document again !! It was for their DUC but since im not using it there is no need !