andy_65_in
Padawan
my bsnl bottom bar internet connect icon these days takes a long time to lunch(open).i am on bsnl bbnd only in non wi fi mode.what to do
launching internet sidebar icon isues
- Thread starter andy_65_in
- Start date
-
- Tags
- bbnd bsnl icon internet lunchopen.i
- Status
Configure the model to PPPoE
*chennai.bsnl.co.in/bbs/wireless/wirelesssecurity.htm#WA3002_Modem_configuration:
*chennai.bsnl.co.in/bbs/wireless/wirelesssecurity.htm#WA3002_Modem_configuration:
OP
andy_65_in
Padawan
Wireless -- Advanced
This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used.
Click "Apply" to configure the advanced wireless options.
this is my readout on my router-its an old siemens sl 2-141
This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used.
Click "Apply" to configure the advanced wireless options.
| AP Isolation: | Off On | |
| Band: | 2.4GHz | |
| Channel: | Auto12345678910111213 | Current: 11 |
| Auto Channel Timer(min) |
| 54g™ Rate: | Auto1 Mbps2 Mbps5.5 Mbps6 Mbps9 Mbps11 Mbps12 Mbps18 Mbps24 Mbps36 Mbps48 Mbps54 Mbps |
| Multicast Rate: | Auto1 Mbps2 Mbps5.5 Mbps6 Mbps9 Mbps11 Mbps12 Mbps18 Mbps24 Mbps36 Mbps48 Mbps54 Mbps |
| Basic Rate: | DefaultAll1 & 2 Mbps1 & 2 & 5.5 & 6 & 11 & 12 & 24 Mbps |
| Fragmentation Threshold: | |
| RTS Threshold: | |
| DTIM Interval: | |
| Beacon Interval: | |
| Maximum Associated Clients: | |
| XPress™ Technology: | Disabled Enabled |
| 54g™ Mode: | 54g Auto 54g Performance 54g LRS 802.11b Only |
| 54g™ Protection: | Off Auto |
| Preamble Type: | long short |
| Transmit Power: | 20% 40% 60% 80% 100% |
this is my readout on my router-its an old siemens sl 2-141
Do you have any page named Internet / WAN? If possible instead of pasting the whole text (which is hard to read and identify) better take screenshots and attach it.
OP
andy_65_in
Padawan
this is the WAN page---Wide Area Network (WAN) Setup
Choose Add, Edit, or Remove to configure WAN interfaces.
Choose Save/Reboot to apply the changes and reboot the system.
Choose Add, Edit, or Remove to configure WAN interfaces.
Choose Save/Reboot to apply the changes and reboot the system.
| VPI/VCI | Service | Protocol | State | Status | IP Address | Remove | Edit |
| 0/35 | pppoe_0_35_1 | Bridge | Enabled | Up | |||
| 0/32 | br_0_32 | Bridge | Enabled | Up | |||
| 8/35 | br_8_35 | Bridge | Enabled | Up | |||
| 8/81 | br_8_81 | Bridge | Enabled | Up | |||
| 0/100 | br_0_100 | Bridge | Enabled | Up |
Edit the 1st one and follow the link => *chennai.bsnl.co.in/bbs/wireless/wirelesssecurity.htm#WA3002_Modem_configuration:
OP
andy_65_in
Padawan
krishna i dont have a type 2 modem- i have a siemens sl 2-141 type
basics are same for every adsl modem.
OP
andy_65_in
Padawan
anyone else who can help-the issue dogs me even now
- Status