Internet connetion problem

Status
Not open for further replies.
S

stalin

Journeyman
Got Airtel Broadband connection....using windows 2000 pro..........not able to connect internet..........IP is address is correct.........doubt some service has been disabled or any other problem........


regards
stalin
 
OP
S

stalin

Journeyman
IE Error
Cannot find Server or DNS Error

Beetel Modem

IP : 192. 168.1.10

geteway : 192. 168.1.1
 
Last edited:
OP
S

stalin

Journeyman
DNS server has been manually entered and has given above but still not working...Reinstalled the network card and configured it but still not work...............

Any program that correct my internet connection.........
 
Last edited:
praka123

praka123

left this forum longback
opendns servers are faster.and if ur connection is configured in router,i donno much.if ur using bridge mode,where u dial to connect to broadband,u can use opendns servers as they are fast and resolves.the procedure is explained in *opendns.com
 
NucleusKore

NucleusKore

TheSaint
OOps I gave you a wrong DNS.

Are you able to ping your router @ 192.168.1.1? If not turn down your firewall and try. Assign a static IP for your card
192.168.1.2
Subnet mask 255.255.255.0
Gateway 192.168.1.1
DNS primary 202.145.184.13
secondary 202.56.230.5

If you still cannot ping your router you will have to check your card, and maybe your router if icmp ping has been turned off
 
OP
S

stalin

Journeyman
I dont have problem ping it is working.............firewall is not in my windows 2000 pro...........
 
NucleusKore

NucleusKore

TheSaint
Did you try everything above^^^^^^^^^^^
If you did, go to 192.168.1.1 in your browser, and login to your router
Check the WAN settings with the help of AirTel customer care. You will need to know your VPI/VCI and other settings. If you have a metered connection by time or bandwidth usage, then you will have to use a bridging mode.
 
OP
S

stalin

Journeyman
yes I tried still I get the error message..............may be some service is stop, something like that..........I dont know which one should I enable it.............
 
NucleusKore

NucleusKore

TheSaint
In your internet explorer, connection settings, set it to never dial a connection and auto detect proxy. Disable any VPN settings which may be there
 
NucleusKore

NucleusKore

TheSaint
Hmmm, sorry, I'm stumped. If you can access your router page on 192.168.1.1 in internet explorer then no problem in the connection between the router and pc. The only possibilities I can think of now are
1. Wrong DNS numbers, get the correct ones from Customer Care
2. Wrong WAN settings, get the correct settings from Customer Care
3. Faulty cable? Does the Link light glow steadily?

And yes I forgot, you are using Windows :D We had an interesting virus once in our college that blocked all outgoing network traffic.
 
OP
S

stalin

Journeyman
Link light is glowing..........DNS number is correct coz I have two different broadband in two PC.....one is work other is not.............no cable faulty coz I cross check the connection with this PC and it is work..........
 
OP
S

stalin

Journeyman
In services msc what should I stop and start.........

I tried all my possible way..........can anyone help..........I dont want to reinstall OS any other possible solution.

Thank you
 
Last edited:
NucleusKore

NucleusKore

TheSaint
Try booting with a linux live cd and browsing. Change your network settings if required as you have for windows and try. If it works.............:D
FORMAT FORMAT FORMAT
 
praka123

praka123

left this forum longback
@stalin:pM some windows pro to help u.i think we both are more of Linux users.
users like Vishal Gupta,gxsaurav etc.
 
Status
Not open for further replies.
Top Bottom