i need to upgrade the ram of my dell latitude d510 laptop.....pls help..

Discussion in 'Laptops and Netbooks' started by tango_cash, Sep 11, 2012.

  1. tango_cash

    tango_cash New Member

    Joined:
    Jan 10, 2004
    Messages:
    309
    Likes Received:
    0
    Trophy Points:
    0
    hi
    i need to upgrade the ram of my dell latitude d510 laptop
    according to 1GB, 200-pin SODIMM, DDR2 PC2-5300 upgrades for Dell Latitude D510 Laptop/Notebook, CT492759 from Crucial.com

    • Module Size: 1GB
    • Package: 200-pin SODIMM
    • Feature: DDR2 PC2-5300
    • Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 128Meg x 64
    the above ram works for my laptop.

    i did some online search and foundTranscend 1gbJM667QSU-1G(i plan to get 2 of these to run in dual channel mode)
    Transcend DDR2-667/PC2-5300 DDR2 1 GB Laptop RAM (JM667QSU-1G) | Ram | Flipkart.com

    • DDR2-667/PC2-5300
    • SO-DIMM Memory Module
    • 200-pin Configuration
    • 3-3-3 CAS Latency
    • Unbuffered
    • 166 MHz Memory Clock Speed
    • 8 x 128 MB DRAM Structure
    • Specified Voltage: 1.8 V
    • Error Check: Non-ECC

    now the only diffrence i see between the two is the DRAM structure 128Meg x 64 v / s 8 x 128 MB.and i am a little confused with
    166 MHz Memory Clock Speed of the transcend.


    should i go for the transcend ram?? does the DRAM structure make any diffrence??will it be compatible to my laptop??
    pls help....
     
  2. Abhishek Nama

    Abhishek Nama New Member

    Joined:
    Aug 24, 2012
    Messages:
    240
    Likes Received:
    0
    Trophy Points:
    0
    AFAIK the transcend Ram will still work on your laptop. And there won't be much of a difference in performance. Better to wait for someone with more knowledge in DRAM structure. But it should work.
     
  3. OP
    OP
    tango_cash

    tango_cash New Member

    Joined:
    Jan 10, 2004
    Messages:
    309
    Likes Received:
    0
    Trophy Points:
    0
    thanks for the reply Abhishek, even i think that it should work but just little doubt because of the DRAM structure thing.
    btw check out http://www.transcendusa.com/support/dlcenter/jetram/product/Pdf/JM667QSU-1G_2300-s.pdf
    it is the manual of JM667QSU-1G.
    read the very first line it says "
    The JM667QSU-1G is a 128M x 64bits DDR2-667 SO-DIMM. The JM667QSU-1G consists of 8pcs 128Mx8 bits DDR2 SDRAMs......
    again i am confused it says both 128M x 64bits and 128Mx8 bits:confused:
     

Share This Page