how to start the system automatically

[ajith_yst]

hey guys is there a way to shut down the system automatically when the power goes off & start it when the power comes back again

 

[bluepearl]

Check if your BIOS has options to switch ON with alarm
Also you can try modem triggered switch ON if u have always on connection !!

Could u be more specific with your question??

 

[ajith_yst]

i want the system to turn off when the power goes out and start again when the power comes back again without any ones interruption

 

[redhat]

You need a UPS for that...

 

[dheeraj_kumar]

If you have a UPS, and if it has a computer interface, you can control it from your comp. Then you could do what you asked.

 

[shift]

Turn on Restore On AC Power Loss in your BIOS

This item specifies whether your system will reboot after a power failure or interrupt
occurs. Settings are:
[Off] Always leaves the computer in the power of f state.
[On] Always leaves the computer in the power on state.
[Last State] Restores the system to the status before power failure
or interrupt occurred.

 

[MetalheadGautham]

either use a UPS, or make a circut for it yourself. But remember - the max it can do is to turn off power. Logging off or in needs drivers.

 

[bluepearl]

For shutting down on power failure u definitely need UPS.
As far as restarting when power comes back, it depends on your BIOS check if it has option to Switch on on power resume.

Do u have UPS, if positive u can configure it from Power Options in Control Panel to suite your needs !!

 

[ajith_yst]

i do have an ups when i try configuring it asks me to select a com port but my ups isnt connected to one must my ups be connected to a port?

 

[dheeraj_kumar]

Obviously... do you expect your UPS to communicate with your computer via your power cord?