How to mod a case ?

Harshverma

Harshverma

Broken In
hello guys , I want to mod my current case (a local case by Majjr , mid tower)
mod includes
adding 140mm LED fan and a grill in front
cutting side panel and make it transparent and install 120mm LED fan
installing LED strips and LED lightings
I am from Delhi , so from where I can buy the stuff needed like grills , LED strips , etc
thanks in advance

my mobo : asus P5QPL-AM
so will i be able to install required number of fans ?
 
CyberKID

CyberKID

In search for Tech Gyan!
For modding your case, you'll be needing a lot of tools, and believe me, they are seriously expensive.Stuff like cutting, sanding and grinding tools will be required.
Also, motherboard has nothing to do with the number of fans you could install, but the PSU has.
 
avinandan012

avinandan012

Cyborg Agent
go to your loacl car modding shop or local greel making(cheaper) shop. give them measurements & they will cut the side panel & acrylic plexi.

If you want to do by yourself then you need (1)a vertical machine saw & (2)some non stiky adhesive tapes.
(3) a big file
(4) a ATX pin remover
(5) basic set of dremel
(6) cable sleeve & hit shrink tubing
(7) a cigerate lighter
(8) rivets & rivet mounter

these are bare minimums for modding

search ebay
better contact mnpctech
 
Last edited:
OP
Harshverma

Harshverma

Broken In
avinandan012 said:
go to your loacl car modding shop or local greel making(cheaper) shop. give them measurements & they will cut the side panel & acrylic plexi.

If you want to do by yourself then you need (1)a vertical machine saw & (2)some non stiky adhesive tapes.
(3) a big file
(4) a ATX pin remover
(5) basic set of dremel
(6) cable sleeve & hit shrink tubing
(7) a cigerate lighter
(8) rivets & rivet mounter

these are bare minimums for modding

search ebay
better contact mnpctech
Click to expand...

and what about decals and spray paints
 
You must log in or register to reply here.
Top Bottom