Help needed.....

Status
Not open for further replies.

cvvikram

MVP in VC++
I have a problem in my system.....firstly i had a asrock motherboard with
intel chipset....It was working fine.....I brought a new intel 865GF motherboard and replaced the old one..I replaced the old 15' monitor with new LG 17' monitor....
Now my problem is.......After formatting the c: drive and when i try to install either the win98se or win xp.... the system hangs indefinetly...
i tried several times.....nothing could be done.....Please help me in this matter....
 
OP
C

cvvikram

MVP in VC++
club_pranay said:
at what stage the setup hangs? hardware detection?

It hangs at various stages,while copying files, while scanning the drives, during the installatio stage etc...
 
OP
C

cvvikram

MVP in VC++
club_pranay said:
there might be some sort of lose connection
please check all the cables, ram modules etc.

I removed all the conections,pheripherals and inserted it...but still the problem persists....most probably there is problem with the bios or hard disk has crashed....when i had the old motherboard i bought the latest LG 17' monitor it was working fine.....but when i replaced the old motherboard with intel 865GBF motherboard....it worked for 5min and it blacked out with indicator blipping....so i formatted the c: to start from first...
 

club_pranay

Nokia 7110 to iPhone 5
well, this is'nt a HDD problem(u can try using that hdd on a different machine)
get your mobo checked at once!!!
also, provide the complete old and new hardware details.
you can easily verify ram, processor, hdd by trying them on other computer.
 
Status
Not open for further replies.
Top Bottom