amanchaudhariaman
Right off the assembly line
Yesterday i started my pc and it did as normal
but next day when i started, it showed the screen [ATTACHED] and did not proceed further for half an hour.
*0.tqn.com/d/pcsupport/1/0/W/4/-/-/safe-mode-windows-7-1.jpg
then i did RESET from cabinet
after that it showed
a black screen and it had written that
WINDOWS IS UNABLE TO ACCESS (some file)
file- boot\bcd
when i tried other os linux from usb (ubuntu,slax) they helped me to access some partitions of harddisk
ubuntu showed C:/ and F:/
slax showed C:/ and D:/
i backuped them
but is unableto get partition E:/
when i checked it with a recovery bootable program (from usb)
it shows only three partitions
with one having the size of my two partitions
i think two partitions got mixed up
sustem spec=
Windows 7 BUILD 7600
HARD DISK 500 GB SEGATE
2GB DDR2 RAM
INTE CORE 2 DUO 2.66 GHz
NO GRAPHIC CARD
but next day when i started, it showed the screen [ATTACHED] and did not proceed further for half an hour.
*0.tqn.com/d/pcsupport/1/0/W/4/-/-/safe-mode-windows-7-1.jpg
then i did RESET from cabinet
after that it showed
a black screen and it had written that
WINDOWS IS UNABLE TO ACCESS (some file)
file- boot\bcd
when i tried other os linux from usb (ubuntu,slax) they helped me to access some partitions of harddisk
ubuntu showed C:/ and F:/
slax showed C:/ and D:/
i backuped them
but is unableto get partition E:/
when i checked it with a recovery bootable program (from usb)
it shows only three partitions
with one having the size of my two partitions
i think two partitions got mixed up
sustem spec=
Windows 7 BUILD 7600
HARD DISK 500 GB SEGATE
2GB DDR2 RAM
INTE CORE 2 DUO 2.66 GHz
NO GRAPHIC CARD