gta sa lag

asp

Right off the assembly line
gta sa lags when fx quality put above low.
i play gta sa on everything on max except fx quality.
these are my specs:

2 gb ram
pentium dual core 3.06 ghz
128 mb graphics card

i think my pc should run it on fx quality-medium
 

tkin

Back to school!!
gta sa lags when fx quality put above low.
i play gta sa on everything on max except fx quality.
these are my specs:

2 gb ram
pentium dual core 3.06 ghz
128 mb graphics card

i think my pc should run it on fx quality-medium
Just run this tool: *www.cpuid.com/softwares/cpu-z.html
Then, click the small arrow beside tools-> Save report as HTML, or Save report as TXT, attach the file here, or just copy the text.
 
OP
A

asp

Right off the assembly line
CPU-Z TXT Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

CPU-Z version 1.69.0.x32

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 2.987 MHz
Sys timer 1.000 KHz
BCLK timer 265.92 MHz


Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E6600
Codename Wolfdale
Specification Pentium(R) Dual-Core CPU E6600 @ 3.06GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping R0
Technology 45 nm
TDP Limit 65 Watts
Core Speed 3058.1 MHz
Multiplier x Bus Speed 11.5 x 265.9 MHz
Rated Bus speed 1063.7 MHz
Stock frequency 3066 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 11.5x
Max VID 1.288 V




Thread dumps
-------------------------------------------------------------------------

CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01008006h
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 2 MB, 2 thread(s)

CPU Thread 1
APIC ID 1
Topology Processor ID 0, Core ID 1, Thread ID 0
Type 01008006h
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 2 MB, 2 thread(s)


Chipset
-------------------------------------------------------------------------

Northbridge Intel Q45/Q43 rev. 03
Southbridge Intel 82801FB (ICH6) rev. 04
Memory Type DDR3
Memory Size 2 GBytes
Channels Single
Memory Frequency 531.8 MHz (1:2)
CAS# latency (CL) 7.0
RAS# to CAS# delay (tRCD) 7
RAS# Precharge (tRP) 7
Cycle Time (tRAS) 20
Row Refresh Cycle Time (tRFC) 80
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
MCHBAR registers
 

xSF

Assembly Line is stuck.
gta sa lags when fx quality put above low.
i play gta sa on everything on max except fx quality.
these are my specs:

2 gb ram
pentium dual core 3.06 ghz
128 mb graphics card

i think my pc should run it on fx quality-medium

I used to play GTA:SA when I had 2gb ram, core2duo@2.83gHz, 128mb integrated GPU. It used to lag for me too at anything more than low, sometimes even on lowest, slightly. Get a discrete gfx card, they are dirt cheap these days.
 
Top Bottom