tech_your_future said:
Try installing libdvdcss and see if that solves the problem.
from where to get it??
__________
out put 4 dmesg
ishan@ubuntu:~$ dmesg
I resources starting at 0f800000 (gap: 0f800000:f06e0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda7 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (011f1000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 1793.159 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.252000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)[4294671.253000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.261000] Memory: 243588k/253888k available (1415k kernel code, 9688k reserved, 763k data, 224k init, 0k highmem)
[4294671.261000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294671.261000] Calibrating delay loop... 3555.32 BogoMIPS (lpj=1777664)
[4294671.283000] Security Framework v1.0.0 initialized
[4294671.283000] SELinux: Disabled at boot.
[4294671.283000] Mount-cache hash table entries: 512
[4294671.283000] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294671.283000] CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294671.283000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294671.283000] CPU: L2 cache: 256K
[4294671.283000] CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000
[4294671.283000] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 03
[4294671.283000] Enabling fast FPU save and restore... done.
[4294671.283000] Enabling unmasked SIMD FPU exception support... done.
[4294671.283000] Checking 'hlt' instruction... OK.
[4294671.287000] Checking for popad bug... OK.
[4294671.287000] checking if image is initramfs... it is
[4294671.903000] Freeing initrd memory: 4821k freed
[4294671.905000] ACPI: Looking for DSDT in initrd... not found!
[4294671.967000] not found!
[4294671.976000] ACPI: setting ELCR to 0200 (from 0820)
[4294672.188000] NET: Registered protocol family 16
[4294672.188000] EISA bus registered
[4294672.188000] ACPI: bus type pci registered
[4294672.190000] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
[4294672.190000] PCI: Using configuration type 1
[4294672.190000] mtrr: v2.0 (20020519)
[4294672.191000] ACPI: Subsystem revision 20050729
[4294672.200000] ACPI: Interpreter enabled
[4294672.200000] ACPI: Using PIC for interrupt routing
[4294672.201000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294672.201000] PCI: Probing PCI hardware (bus 00)
[4294672.201000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294672.204000] Uncovering SIS962 that hid as a SIS503 (compatible=1)
[4294672.204000] Enabling SiS 96x SMBus.
[4294672.205000] Boot video device is 0000:01:00.0
[4294672.207000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.212000] ACPI: Power Resource [URP1] (off)
[4294672.212000] ACPI: Power Resource [URP2] (off)
[4294672.212000] ACPI: Power Resource [FDDP] (off)
[4294672.212000] ACPI: Power Resource [LPTP] (off)
[4294672.213000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[4294672.214000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[4294672.214000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[4294672.214000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[4294672.215000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[4294672.215000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[4294672.215000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[4294672.216000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[4294672.216000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.216000] pnp: PnP ACPI init
[4294672.221000] pnp: PnP ACPI: found 11 devices
[4294672.221000] PnPBIOS: Disabled by ACPI PNP
[4294672.221000] PCI: Using ACPI for IRQ routing
[4294672.221000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294672.240000] audit: initializing netlink socket (disabled)
[4294672.240000] audit: initialized
[4294672.240000] VFS: Disk quotas dquot_6.5.1
[4294672.240000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.240000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294672.240000] devfs: boot_options: 0x0
[4294672.240000] Initializing Cryptographic API
[4294672.240000] isapnp: Scanning for PnP cards...
[4294672.594000] isapnp: No Plug & Play device found
[4294672.629000] PNP: PS/2 Controller [PNP030b
S2K,PNP0f03
S2M] at 0x60,0x64 irq 1,12
[4294672.629000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.629000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.629000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294672.629000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.633000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.634000] io scheduler noop registered
[4294672.634000] io scheduler anticipatory registered
[4294672.634000] io scheduler deadline registered
[4294672.634000] io scheduler cfq registered
[4294672.634000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.635000] EISA: Probing bus 0 at eisa.0
[4294672.635000] EISA: Detected 0 cards.
[4294672.635000] NET: Registered protocol family 2
[4294672.644000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294672.644000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[4294672.644000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[4294672.644000] TCP: Hash tables configured (established 8192 bind 8192)
[4294672.644000] NET: Registered protocol family 8
[4294672.644000] NET: Registered protocol family 20
[4294672.644000] ACPI wakeup devices:
[4294672.644000] PCI0 PS2M PS2K UAR1 USB1 USB2 USB3 USB4 S139 LAN MDM AUD SLPB
[4294672.644000] ACPI: (supports S0 S1 S4 S5)
[4294672.645000] Freeing unused kernel memory: 224k freed
[4294672.678000] vga16fb: initializing
[4294672.678000] vga16fb: mapped to 0xc00a0000
[4294672.772000] Console: switching to colour frame buffer device 80x30
[4294672.772000] fb0: VGA16 VGA frame buffer device
[4294672.772000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294673.864000] Capability LSM initialized
[4294673.883000] NET: Registered protocol family 1
[4294673.904000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.904000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294673.904000] ACPI: bus type ide registered
[4294673.916000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294673.916000] SIS5513: chipset revision 0
[4294673.916000] SIS5513: not 100% native mode: will probe irqs later
[4294673.916000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[4294673.916000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda
MA, hdb
MA
[4294673.916000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc
MA, hdd
MA
[4294673.916000] Probing IDE interface ide0...
[4294674.180000] hda: Maxtor 2F040L0, ATA DISK drive
[4294674.588000] hdb: DVD-ROM 16X, ATAPI CD/DVD-ROM drive
[4294674.639000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.639000] Probing IDE interface ide1...
[4294675.158000] Probing IDE interface ide1...
[4294675.677000] Probing IDE interface ide2...
[4294676.189000] Probing IDE interface ide3...
[4294676.701000] Probing IDE interface ide4...
[4294677.213000] Probing IDE interface ide5...
[4294677.731000] hda: max request size: 128KiB
[4294679.318000] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294679.318000] hda: cache flushes supported
[4294679.318000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3
[4294679.435000] hdb: ATAPI 32X DVD-ROM drive, 256kB Cache
[4294679.435000] Uniform CD-ROM driver Revision: 3.20
[4294681.894000] Attempting manual resume
[4294681.894000] swsusp: Suspend partition has wrong signature?
[4294681.971000] usbcore: registered new driver usbfs
[4294681.971000] usbcore: registered new driver hub
[4294681.972000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294681.972000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[4294681.972000] PCI: setting IRQ 5 as level-triggered
[4294681.972000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
[4294681.972000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294681.973000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[4294681.973000] ohci_hcd 0000:00:03.0: irq 5, io mem 0xdfff8000
[4294681.986000] hub 1-0:1.0: USB hub found
[4294681.986000] hub 1-0:1.0: 2 ports detected
[4294681.989000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[4294681.989000] PCI: setting IRQ 11 as level-triggered
[4294681.989000] ACPI: PCI Interrupt 0000:00:03.1
-> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[4294681.989000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294681.989000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[4294681.989000] ohci_hcd 0000:00:03.1: irq 11, io mem 0xdfff9000
[4294682.002000] hub 2-0:1.0: USB hub found
[4294682.002000] hub 2-0:1.0: 2 ports detected
[4294682.005000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[4294682.005000] ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
[4294682.005000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
[4294682.005000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[4294682.005000] ohci_hcd 0000:00:03.2: irq 11, io mem 0xdfffa000
[4294682.018000] hub 3-0:1.0: USB hub found
[4294682.018000] hub 3-0:1.0: 2 ports detected
[4294682.055000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[4294682.055000] ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[4294682.055000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
[4294682.055000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[4294682.055000] ehci_hcd 0000:00:03.3: irq 11, io mem 0xdfffb000
[4294682.055000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[4294682.055000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294682.055000] hub 4-0:1.0: USB hub found
[4294682.055000] hub 4-0:1.0: 6 ports detected
[4294682.062000] usb 1-1: new full speed USB device using ohci_hcd and address 2[4294682.973000] usb 1-1: new full speed USB device using ohci_hcd and address 3[4294684.115000] SCSI subsystem initialized
[4294684.117000] Initializing USB Mass Storage driver...
[4294684.119000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294684.119000] usb-storage: device found at 3
[4294684.119000] usb-storage: waiting for device to settle before scanning
[4294684.119000] usbcore: registered new driver usb-storage
[4294684.119000] USB Mass Storage support registered.
[4294684.861000] ACPI: CPU0 (power states: C1[C1])
[4294685.062000] Attempting manual resume
[4294685.085000] swsusp: Suspend partition has wrong signature?
[4294685.128000] kjournald starting. Commit interval 5 seconds
[4294685.128000] EXT3-fs: mounted filesystem with ordered data mode.
[4294686.511000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294689.124000] Vendor: KYE Model: Genius Rev: 0100
[4294689.124000] Type: Direct-Access ANSI SCSI revision: 04
[4294689.174000] usb-storage: device scan complete
[4294691.455000] SCSI device sda: 496128 512-byte hdwr sectors (254 MB)
[4294691.461000] sda: Write Protect is off
[4294691.461000] sda: Mode Sense: 38 00 00 00
[4294691.461000] sda: assuming drive cache: write through
[4294691.487000] SCSI device sda: 496128 512-byte hdwr sectors (254 MB)
[4294691.494000] sda: Write Protect is off
[4294691.494000] sda: Mode Sense: 38 00 00 00
[4294691.494000] sda: assuming drive cache: write through
[4294691.494000] /dev/scsi/host0/bus0/target0/lun0: p1
[4294691.506000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0