Desktop for 35K

RAMK

Right off the assembly line
Joined
Nov 23, 2010
Messages
3
Hi all please suggest me AMD and INTEL Configurations,


1. What is the purpose of the computer? (Note: If you are planning to say multimedia, you will have to be more specific as all types of systems are capable of doing that)
A:I need Quad core CPU to run network simulator programs, watching movies
2. Are you open to alternate ideas/products giving similar better performance but offering more VFM/ sellers? If not- why?
A:YES
3. What is your MAX budget?
A:35000
4. Planning to overclock?
A:NO
5. Which OS are you planning to use?
A:Windows 7, Linux
6. How much hard drive space is needed?
A:500 GB
7. What resolution will the screen run at & whats the size of the screen you want?
A:22" HD Monitor
8. How would you rate your hardware knowledge from the count of 1-10? (1 being the lowest, 5 being you are somewhat in sync with the current performers and 10 being the highest)
A:5
9. Have you ever built a desktop before or will this be done by an assembler?
A:YES
10. When are you planning to buy the system?
A:1st Week of December
11. Are you one of the types looking out for "future proof" configurations?
A:Yes
12. Are there going to be any components that you don't want to include in this new rig? If yes, do mention.
A:
13. Which city do you live in and are you open to buying from shops from other city/states?
A:Chennai
14. Mention any other points if deemed necessary
A:No budget for Graphic Card now, I may buy it in future, Sugget me good on board graphics

Thanks
RamK
 

Ishu Gupta

Manchester United
Joined
Oct 31, 2010
Messages
2,093
AMD x6 1055T six core 2.8GHz - 10k
Gigabyte GM-880GMA-UD2H - 5.5k
GSkill DDR3 2x2GB 1600MHz - 4k
Seagate 500GB - 1.7k
Benq G2220HD - 7.5k
NZXT Gamma - 2k OR CM Elite 430 - 2.7k
Corsair VX450W - 3.5k
KB & Mouse - .5k
TOTAL - 34.7k

Mobo has both USB3 & SATA3 afaik.
VX450W for a med end Graphic card which, as you say, you might buy in future.

I know you don't want to OC but its not very difficult.
 

Reaper_vivek

BAN...KAI
Joined
Sep 12, 2008
Messages
608
Go with ishu's config..its best suited for ur needs..and the board has hd 4250 i guess..very good igp.
 
OP
R

RAMK

Right off the assembly line
Joined
Nov 23, 2010
Messages
3
Hi all thank you for your advise, the configuration looks fine for me. Is there any alternate for PSU around 2.5k for this configuration.

Thanks
RamK
 

Cool Buddy

Wise Old Owl
Joined
Mar 31, 2006
Messages
1,754
Since this config does not include a graphics card, so you may go for Corsair CX400. However, this will limit the future possibilities for an upgrade i.e. you'll have to buy a new PSU in case you want to add a graphics card
 

ssb1551

Technomancer
Joined
Sep 13, 2010
Messages
2,158
Hi all thank you for your advise, the configuration looks fine for me. Is there any alternate for PSU around 2.5k for this configuration.

Thanks
RamK

Since the prices of Phenoms have come down you can go for X6 1075T for 9.8k.
As for your PSU query you can get FSP Saga II 500W for 2.2k though VX450 as suggested by Ishu would be better.
 
OP
R

RAMK

Right off the assembly line
Joined
Nov 23, 2010
Messages
3
Added Altec VS2621 speakers, (is it ok, or any other suggestions),
and also suggest me UPS under 2K

Thanks
Ramk
 

ssb1551

Technomancer
Joined
Sep 13, 2010
Messages
2,158
I aint an audiophile so can't comment on speakers.
UPS within 2k - APC 550VA(hope I got the model no. right) but it would be better if you could go for APC 650VA.
 
Top