Cooling VRM

[Jaskanwar Singh]

I installed a fan with support from ties tied to various parts

*i.imgur.com/g8pur.jpg
*i.imgur.com/wESOk.jpg
*i.imgur.com/2tofX.jpg

 

[Skud]

Any improvement on performance?

 

[Jaskanwar Singh]

this is just to decrease vrm temperature skud.

 

[Skud]

OK, got it. I thought you are going to bump the speed and volts.

Nice innovation.

 

[Jaskanwar Singh]

thanks buddy

 

[topgear]

nice - you can put another 80mm fan on the top side from inside

 

[Tarun]

i did that to my 78LMT-S2P tooo

 

[Jaskanwar Singh]

^nice!

@TP
yes, i will be adding fans.

 

[coderunknown]

nice - you can put another 80mm fan on the top side from inside

this is what should be done. though cooling will less but at least safer.

@jassy, innovative buddy but check those wire ties. if any of those gets loose, you'll get a processor biriyani

 

[topgear]

^^ just remove the air filter from the top side - and the fan will dissipate lots of hot air and keep the system cooool

 

[avinandan012]

or you can build a heat sink with aluminium(get 1meter of those window rail aluminium sockets ), it's not that difficult .
just measure the VRMs as a whole

 

[Jaskanwar Singh]

this is what should be done. though cooling will less but at least safer.

@jassy, innovative buddy but check those wire ties. if any of those gets loose, you'll get a processor biriyani

i have tied it securely.

or you can build a heat sink with aluminium(get 1meter of those window rail aluminium sockets ), it's not that difficult .
just measure the VRMs as a whole

how to stick it? with TIM?

but i read somewhere cooling with fan is better.