Computer Freezing problem

[rijinpk1]

u on Tapatalk?



Shud I update the BIOS
current version is 2009 & last version available is 2010

you can post a screenshot of crystal disk info software.

 

[amjath]

u on Tapatalk?



Shud I update the BIOS
current version is 2009 & last version available is 2010

Yes why?

 

[Zangetsu]

you can post a screenshot of crystal disk info software.

ok will post it

Yes why?

sometimes posts are missed in TT

 

[Zangetsu]

you can post a screenshot of crystal disk info software.

Attached
Now, I have removed one RAM module and using only 2GB..so far no freeze occurred.
but I'll check it for 1 month if any of the module is faulty

 

[rijinpk1]

Attached
View attachment 12892

Now, I have removed one RAM module and using only 2GB..so far no freeze occurred.
but I'll check it for 1 month if any of the module is faulty

hdd is just fine. no issues there.

you may remove the serial number

 

[Zangetsu]

hdd is just fine. no issues there.

you may remove the serial number

what's with serial number?
u also remove the quote

 

[rijinpk1]

u also remove the quote

no need now

 

[Zangetsu]

Since yesterday this Issue is occurring frequently
also I found that my other two alternate RAM slots (blue in color) are not working anymore coz when I use them PC doesn't boot.
so just other two alternate RAM slots are working and the bad part is warranty is also over (3yrs)

I downloaded RealTemp to monitor CPU & GPU Temp (CPU temp max is 54 deg C & GPU is 42 deg C)

now my last option is to RMA the RAM (as it has 10yrs warranty) but I hope that after the RMA everything should be normal.

 

[rakesh_ic]

Since yesterday this Issue is occurring frequently
also I found that my other two alternate RAM slots (blue in color) are not working anymore coz when I use them PC doesn't boot.
so just other two alternate RAM slots are working and the bad part is warranty is also over (3yrs)

I downloaded RealTemp to monitor CPU & GPU Temp (CPU temp max is 54 deg C & GPU is 42 deg C)

now my last option is to RMA the RAM (as it has 10yrs warranty) but I hope that after the RMA everything should be normal.

If you put the RAM's in the secondary slots without RAM's in primary the system wont bootup. It doesnt mean you have bad set of ports. You can only test them with 4 RAM's. Is that the ideal temperature of your CPU without any games played?

 

[abhidev]

Try putting 1 RAM in primary n other in secondary slot..

 

[Zangetsu]

If you put the RAM's in the secondary slots without RAM's in primary the system wont bootup. It doesnt mean you have bad set of ports. You can only test them with 4 RAM's. Is that the ideal temperature of your CPU without any games played?

this is my mobo which is the primary slot?

*www.gigabyte.in/fileupload/product/2/3502/3148.jpg

yes that is the idle temp

 

[maheshn]

this is my mobo which is the primary slot?

*www.gigabyte.in/fileupload/product/2/3502/3148.jpg

yes that is the idle temp

If you look near the ends of the RAM slots it will be written on the board in tiny letters DIMM1, 2, 3, 4. The slot corr. to DIMM1 is the primary slot.

 

[Zangetsu]

^^thanx
didn't knew that RAM also has primary/secondary slots.
where primary is necessary to be mounted for booting

so I guess DIMM1 & DIMM3 are primary & D2,D4 are secondary (for Dual Channel Setup)

 

[Zangetsu]

UPDATE: Mods can close this thread.

I have checked my MoBo with Gigabyte service center and they said its proccy socket is not proper and chips have developed rust..so even if we repair the issue will repeat
so, I will buy a new one and will open respective thread

 

[amjath]

^ so warranty over? No replacement?? Its their quality issue right?

 

[Zangetsu]

^ so warranty over? No replacement?? Its their quality issue right?

bought in 2010 so yes its over
can u help me in my thread (siggy)