cannot start Remote Access Connection Manager

Status
Not open for further replies.

nikhil1243

Right off the assembly line
cannot start Remote Access Connection Manager
this is error coming
could not start cannot start Remote Access Connection Manager on local computer
Error 5: access is denied
 

ravi_9793

TechTin.com
wht version of windows Xp u r using??
Have you upgraded to SP1??

If yes..re-install SP1 again for ur windows.
 

iceeeeman

Journeyman
These issues may occur if you upgrade Windows XP SP1 Home Edition to Windows XP Professional, or if you use the System Restore feature to restore to a state prior to SP1, as these actions may cause an integrity problems with registry settings in the System hive.

To resolve these problems:
1. Copy / Paste the following to a notepad file,and then save it as Solution.reg
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan]
"ObjectName"="LocalSystem" 
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP\25] 
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP\26]

2. Merge the Solution.reg file with you registry.(i.e Double click on it and then press Yes]

3. Shutdown and restart Windows XP.

OR

1. Browse to the %SystemRoot%\inf\Sr.inf file."%" satnds for the Drive where ur Windows is installed)

2. Right-click the %SystemRoot%\inf\Sr.inf file and press Install.

3. Press Browse in the Files Needed dialog box and select the Sr.sys file from the i386 folder of the Windows XP CD-ROM.

4. Press OK.
5. When the install is finished, shutdown and restart Windows XP.

Hope This helps you
 

sauravktr

Journeyman
Go To
Run-->> services.msc -->> check here that "Remote Access Connection Manager" is started or not..if not then start it....
 

slugger

Banned
check out if the dependencies, me think it depends on telephony service, start it and see if your service starts
 
Status
Not open for further replies.
Top Bottom