BIOS-Problem..PLZ help..

Status
Not open for further replies.

adit_3250

Right off the assembly line
Hi,,,
i tried overclocking my PC''s RAM by reducingthe latencies..After restarting the PC,,i am getting nothing but three beeps like..teeet teet teeet...
There is no display And BIOS is also not appearing...I tried replacing the CMOS battery but dat dint solve the problem...Is it dat my motherboard has got any problem or wot...????
Its an intel D 945Gc motherboard...

Plz help ASAP.. *www.daniweb.com/forums/dani-images/smilies/sleek/qqb010.gif

Thanks,,,
Adit...
 

realdan

Ambassador of Buzz
check your motherboard manual (search on intel site if you dont have it) and follow instructions as to the reset of BIOS settings using jumpers or someother methods
 

VarDOS

15.0 GHz
u did same as me....my RAM latencies were 5-5-5-15 and i changed it to 4-4-4-12 and the same condition occured as u r s....I tried to reset the BIOS but it didn't worked ...If u do the same as me u r prob can be solved visit *www.thinkdigit.com/forum/showthread.php?t=104918

But if u r doing it frst time don't do it...Do it on u r own risk....or just give the CPU to the vendor....
 
P

paroh

Guest
i think for secure side read ur motherboard manual as there is option of resetting the bios to factory default by changing the jumper positon on the board

get the manual from here and see for bios recovery
*www.intel.com/products/desktop/chipsets/945g/945g-overview.htm

First try the first image method if it works its good other wise try the second image method. Other wise try Varad Dilip Choudhari method but do it with great care
1
*img147.imageshack.us/img147/797/93577445on1.jpg



2
*img179.imageshack.us/img179/9536/59988342xp9.jpg
 
Status
Not open for further replies.
Top Bottom