A Wiered No Display Probelm ?

Status
Not open for further replies.

satyamy

Alive Again...
I have a Intel 865GSA Board + Intel 3.2Ghz HT Processor
512MB DDR RAM
160GB HDD
and 17" LG Flatron (E700SH) Monitor
and also Local Brand 600VA UPS

My CPU and Monitor is connected to UPS

now My Prob is
When I On my PC by pressing Start button in CPU
it get power (green light on) but monitor not on's :(
after when i press reset button 3-4 times it get on properly

i cant understand what can be the prob :confused:
 

debsuvra

is NOT a PC/Mac
I have a Intel 865GSA Board + Intel 3.2Ghz HT Processor
512MB DDR RAM
160GB HDD
and 17" LG Flatron (E700SH) Monitor
and also Local Brand 600VA UPS

My CPU and Monitor is connected to UPS

now My Prob is
When I On my PC by pressing Start button in CPU
it get power (green light on) but monitor not on's :(
after when i press reset button 3-4 times it get on properly

i cant understand what can be the prob :confused:
I think that the connection of the Monitor from the UPS is loose or the plug ends are not rightly plugged in the socket. Also the wire itself can be damaged. Try replugging the monitor wire and also switching it with another one.

The problem might be with the SMPS
SMPS do not supply power to the monitor dude. :D
 
OP
satyamy

satyamy

Alive Again...
Thanks friends for the suggestions
but After trying all the basic things and checking all the connections i have posted a question here

today morning i noticed 1 more thing i removed my ram and on the pc, but there were no beep (no sound or error) :(

after pressing restart button 3-4 times i got the error beep
than i inserted RAM and PC on;s correctly

but the big question is why it is not starting on 1st attempt ????
 

debsuvra

is NOT a PC/Mac
Thanks friends for the suggestions
but After trying all the basic things and checking all the connections i have posted a question here

today morning i noticed 1 more thing i removed my ram and on the pc, but there were no beep (no sound or error) :(

after pressing restart button 3-4 times i got the error beep
than i inserted RAM and PC on;s correctly

but the big question is why it is not starting on 1st attempt ????
Did u tried to run the PC without using UPS ? I mean by direct connecting the CPU and Monitor in plugs ?
 
Status
Not open for further replies.
Top Bottom