Looking for a Pc from 60-70k

bssunilreddy

Chosen of the Omnissiah
Anyone can help me build my pc in Bangalore plz. I tried building but it shuts down in 20-25 seconds and then turns on again infinitely. Does not even reach bios. Somebody can helo or point me to some local assembler here. I have tried replacong thr motherboard and the problem is the same
Create a new thread in the PC Buying Section by answering the Questionnaire 1st...

Sent from my ASUS_T00K using Tapatalk
 
OP
Sarang\m/

Sarang\m/

Journeyman
Can you post your problem more clearly. Elobarate by posting some pictures of your problem...

Sent from my ASUS_T00K using Tapatalk

I assembled the pc last week. I connected every component and then turned on the system. The system turned on. Motherboard was showing lights and CPU and system fans were working fine. But after 20 seconds it shut itself down and restarted. This cycle continued infinitely. I then removed everything but CPU from the motherboard and the same thing happened. I replaced my motherboard and connected CPU and RAM only but still the system shuts down after 20 seconds and restarts before reaching the bios. I will be posting the pictures in the evening when I reach home. My complete specs for the system are:

i5 6500
Gigabyte B150m D3h
Antec VP 450w
Corsair Vengeance LPX 8gb
zotac 1060 6gb mini
Wd blue hard disk
corsair spec-03 case
 

image

Broken In
I assembled the pc last week. I connected every component and then turned on the system. The system turned on. Motherboard was showing lights and CPU and system fans were working fine. But after 20 seconds it shut itself down and restarted. This cycle continued infinitely. I then removed everything but CPU from the motherboard and the same thing happened. I replaced my motherboard and connected CPU and RAM only but still the system shuts down after 20 seconds and restarts before reaching the bios. I will be posting the pictures in the evening when I reach home. My complete specs for the system are:

i5 6500
Gigabyte B150m D3h
Antec VP 450w
Corsair Vengeance LPX 8gb
zotac 1060 6gb mini
Wd blue hard disk
corsair spec-03 case

Please post buying price and source for all the components.
 

bssunilreddy

Chosen of the Omnissiah
I assembled the pc last week. I connected every component and then turned on the system. The system turned on. Motherboard was showing lights and CPU and system fans were working fine. But after 20 seconds it shut itself down and restarted. This cycle continued infinitely. I then removed everything but CPU from the motherboard and the same thing happened. I replaced my motherboard and connected CPU and RAM only but still the system shuts down after 20 seconds and restarts before reaching the bios. I will be posting the pictures in the evening when I reach home. My complete specs for the system are:

i5 6500
Gigabyte B150m D3h
Antec VP 450w
Corsair Vengeance LPX 8gb
zotac 1060 6gb mini
Wd blue hard disk
corsair spec-03 case
Did you assemble the whole system yourself or any technician did?

Steps to be followed:

1. Replace the CMOS battery on the motherboard with a new sealed one, then set everything to defaults and save and reboot,

2. Remove the RAM and try to boot, If it boots by emitting 5 beeps then RAM is good,

3. Remove the processor again and apply some thermal paste and reseat it and boot, Just check whether the CPU heatsink fan is working as it should,

4. Remove the GPU and boot without it,

5. In the BIOS, there will a setting for using the discrete GPU as your main GPU, check it and set it,

6. Remove the PSU and reconnect all,
Check whether you connected the EPS 6pin power connector behind the processor.

7. Download the latest BIOS update for Gigabyte B150M-D3H from Gigabyte.in and update the BIOS to the latest update.

If all steps fail to start up the system, then you need to send the Processor, Motherboard & RAM for RMA.

Just complete all the above steps & tell me here what has happened.

Sent from my ASUS_T00K using Tapatalk
 
OP
Sarang\m/

Sarang\m/

Journeyman
Did you assemble the whole system yourself or any technician did?

Steps to be followed:

1. Replace the CMOS battery on the motherboard with a new sealed one, then set everything to defaults and save and reboot,

2. Remove the RAM and try to boot, If it boots by emitting 5 beeps then RAM is good,

3. Remove the processor again and apply some thermal paste and reseat it and boot, Just check whether the CPU heatsink fan is working as it should,

4. Remove the GPU and boot without it,

5. In the BIOS, there will a setting for using the discrete GPU as your main GPU, check it and set it,

6. Remove the PSU and reconnect all,
Check whether you connected the EPS 6pin power connector behind the processor.

7. Download the latest BIOS update for Gigabyte B150M-D3H from Gigabyte.in and update the BIOS to the latest update.

If all steps fail to start up the system, then you need to send the Processor, Motherboard & RAM for RMA.

Just complete all the above steps & tell me here what has happened.

Sent from my ASUS_T00K using Tapatalk

1. Will replace CMOS battery. I have already sent back the motherboard to amazon and got a replacement though. It was having the same problem so I guess motherboard is not the issue. I will still replace CMOS battery and check.

2. Removed the RAM and booted. There aren't any sort of beeps. I guess motherboard speaker is not there.

3. Have removed the processor and removed and reapplied thermal paste. It fits well. The heatsink fan is working well for the 20 seconds it stays on.

4. Removed the GPU, Hard disk, RAM and still the problem remains.

5. Can't even reach bios. It shuts itself down before it reaches bios.

6. I have reconnected all the connections. At the moment I have applied only 24 pin connector to motherboard and 8 pin to CPU.

7. Again can't even reach the bios.

At this moment I am thinking my PSU is faulty but I am not sure. I will RMA the PSU and then see if it works or not.

- - - Updated - - -

Why did you not opted for Seasonic S12II 520w @ 5.5k but instead bought Antec VP450P.

Sent from my ASUS_T00K using Tapatalk

Yes my mistake now I feel :(
 

HE-MAN

Ambassador of Buzz
first of all make sure you have connected the cpu fan connector into cpu header on the mobo and not on any other optional headers. Stick only 1 ram at a time. Also each time you fail change the ram slot but use the same ram. The 24pin power and 8pin power connector should be pressed and sitted properly. do not add hdd or gpu first just try to get into bios. Make sure that motherboard is sitted properly on the stand off and not touching any metal parts of case. Sometimes this short cause the psu to shutdown the system to prevent damage.
 
Top Bottom