Suggest replacement MOB for an Intel PC

abhijith44

Broken In
Hi Friends,

I need your suggestion , One of my friend's PC crashed today , it seems MOB is dead.
It is 4 year old system , with Intel Core 2 duo 2.4 GHZ which had :
Intel® Desktop Board D945GCPE ,is it possible to find a replacement for this MOB
in market ? I am from Mysore.
I tried online but no where could find such an old Mob.

Please suggest alternate mob for this pc .

Regards,
Abhijith
 

TechnoHolic

Journeyman
It's Intel E6600 processor, Better you get a Gigabyte G41 motherboard. Local prices around 3k.
Gigabyte GA-G41M Motherboard - Gigabyte: Flipkart.com
 
OP
abhijith44

abhijith44

Broken In
It's Intel E6600 processor, Better you get a Gigabyte G41 motherboard. Local prices around 3k.
Gigabyte GA-G41M Motherboard - Gigabyte: Flipkart.com

Thanks for your info, I was worried if the suitable mob was hard to find and also was in a perception I need to get any mob with D945XXX version itself.
 

TechnoHolic

Journeyman
Everything depends on socket. Your's is 775 socket processor. Now there are not enough options for old-day processors (only G41 chipset),
locally you'll find some more brands like asrock/ecs etc. I recommend gigabyte.
 
OP
abhijith44

abhijith44

Broken In
Thanks for the suggestion , Technoholic, Would you please recommend a mob which can accept ddr3's , as any way buying a new mob , if I ask him to buy a new one, it can run on ddr3... Pls suggest

I was searching Flipkart , found this
*www.flipkart.com/gigabyte-ga-g41m-motherboard/p/itmdfa2pbnwcgt7x?pid=MBDD69WPZD7G7GQY

it says
:
Form FactorMicro-ATX
Socket TypeLGA 775
Compatible ProcessorsIntel Core 2 Quad Processor, Intel Core 2 Extreme X6800 Processor, Intel Core 2 Duo Processor, Intel Pentium Dual Core Processor, Intel Celeron Dual Core Processor, Intel Pentium 4 Processor, Intel Celeron 400 Sequence Processor
FSB800, 1066, 1333 MHz
ChipsetIntel G41, Intel ICH7
Memory
Number of Memory Slots4 Slots
Memory Configuration8 GB DDR3 Dual Channel DIMM
Memory FrequencyDDR2: 667 MHz, 800 MHz, 1066(O.C) MHz, DDR3: 800 MHz, 1066 MHz, 1333(O.C) MHz
Storage
SATA 3 Gb/sIntel ICH7

==============================

Will this fit for the given processor and replaces the earlier mob ?

Regards,
Abhijith
 

TechnoHolic

Journeyman
This one is Combo Board (supports both DDR2 DDR3 Modules but "Mixed mode, populating DDR2 and DDR3 memory modules simultaneously is not supported"-Gigabyte Site *www.gigabyte.in/products/product-page.aspx?pid=4213)
Gigabyte GA-G41M Motherboard - Gigabyte: Flipkart.com

This is DDR3 Board.
Gigabyte GA-G41MT-S2PT Motherboard - Gigabyte: Flipkart.com

Both of them supports C2D processors.
Try the first one.
 
Last edited:
Top Bottom