Share your xorg.conf file here

[Faun]

I thought it would be really helpful to share our xorg.conf file along with the grahics card, monitor name and Distro.

1) just run this command in terminal

cat /etc/X11/xorg.conf > xorg.txt

2) Attach the xorg.conf file created in Home directory here.


Graphics Card: intel GMA X3000
Monitor: LG 700E 17' CRT
Distro: Ubuntu 7.10 (Gutsy Gibbon)

 

[Rahim]

Monitor: Samsung 55V Samtron
Graphic: Intel 845GVSR on Board
Ubuntu Gutsy Gibbon 7.10

xorg file:

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier    "Generic Keyboard"
Driver        "kbd"
Option        "CoreKeyboard"
Option        "XkbRules"    "xorg"
Option        "XkbModel"    "pc105"
Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
Identifier    "Configured Mouse"
Driver        "mouse"
Option        "CorePointer"
Option        "Device"        "/dev/input/mice"
Option        "Protocol"        "ImPS/2"
Option        "ZAxisMapping"        "4 5"
Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "stylus"
Option        "Device"    "/dev/input/wacom"
Option        "Type"        "stylus"
Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "eraser"
Option        "Device"    "/dev/input/wacom"
Option        "Type"        "eraser"
Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver        "wacom"
Identifier    "cursor"
Option        "Device"    "/dev/input/wacom"
Option        "Type"        "cursor"
Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
EndSection

Section "Device"
Identifier    "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver        "intel"
BusID        "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier    "SAMTRON 55V"
Option        "DPMS"
EndSection

Section "Screen"
Identifier    "Default Screen"
Device        "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor        "SAMTRON 55V"
DefaultDepth    24
SubSection "Display"
Modes        "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier    "Default Layout"
Screen        "Default Screen"
InputDevice    "Generic Keyboard"
InputDevice    "Configured Mouse"

# Uncomment if you have a wacom tablet
#    InputDevice     "stylus"    "SendCoreEvents"
#    InputDevice     "cursor"    "SendCoreEvents"
#    InputDevice     "eraser"    "SendCoreEvents"
EndSection

 

[Hitboxx]

And also please do mention the distro, not everyone uses Ubuntu.

 

[FilledVoid]

Monitor: LG 700E
Graphic: XFX 8600 GT
Ubuntu Gutsy Gibbon 7.10 64 Bit

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation G80 [GeForce 8600 GT]"
	Driver		"nvidia"
	Busid		"PCI:2:0:0"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	Horizsync	28-64
	Vertrefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation G80 [GeForce 8600 GT]"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Modes		"1280x1024"	"1152x864"	"1024x768"	"800x600"	"640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	
	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
Section "Module"
	Load		"glx"
EndSection

 

[praka123]

distros: Debian Sid(permanant),Ubuntu Gutsy,Archlinux
graphics card:XFX NVIDIA 7300GT 256MB DUAL DVI

#  (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the  manual page.
# (Type "man " at the shell prompt.)
#
# This file is automatically updated on  package upgrades *only*
# if it has not been modified since the last upgrade of the
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh

Section "Files"
        Fontpath        "/usr/share/fonts/X11/misc"
        Fontpath        "/usr/share/fonts/X11/cyrillic"
        Fontpath        "/usr/share/fonts/X11/100dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/75dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/Type1"
        Fontpath        "/usr/share/fonts/X11/100dpi"
        Fontpath        "/usr/share/fonts/X11/75dpi"
      # path to defoma fonts
       Fontpath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc104"
        Option          "XkbLayout"     "us"
        Option          "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "Device"
        Identifier      "nVidia Corporation G70 [GeForce 7300 GT]"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
        Option          "AddARGBVisuals"        "True"
        Option          "AddARGBGLXVisuals"     "True"
        Option          "NoLogo"        "True"
        Option          "UseEdidDpi"   "FALSE"
        Option          "DPI"   "96 x 96"
EndSection

Section "Extensions"
    Option "Composite" "Enable"
EndSection

Section "Monitor"
        Identifier      "S/T 57/56E/V"
        HorizSync       30.0-55.0
        VertRefresh     50.0-120.0
        Option          "DPMS"
        DisplaySize      211.6 158.75
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "nVidia Corporation G70 [GeForce 7300 GT]"
        Monitor         "S/T 57/56E/V"
        DefaultDepth    24
        DefaultFbBpp    32
        SubSection "Display"
                  Depth           24
                  FbBpp           32
                Modes           "800x600"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        screen          "Default Screen"
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"
EndSection

DefaultDepth "24" to use 24-bit color and also DefaultFbbpp "32" to use 32 bits per pixel.
(nothing much of use though)

 

[shady_inc]

Here's Mine from Fedora 8:
Monitor: HCM510LSA
Graphic Card: Intel 845G

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us+inet"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "intel"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection