Port forwarding problem in HUAWEI Quidway WA3001A Router

Status
Not open for further replies.
src2206

src2206

In the zone
Hello friends

I am desparately trying to forward one port manually in this router provided with my Dataone BB Connection, but no matter how much I try I always get an error massege: "ERROR: Error found on this page".

I have succesfully created the new rule involving the port I desire to forward, the only problem is I can not add this rule.

This happens with either a newly created rule or an existing template rule which are inbuilt. I triedto restart [power off and on] the router, but that did not help.

Could some one please help me? :(

Thank you.
 
dissel

dissel

Cyborg Agent
Go to the modem admin page i,e *192.168.1.1

Go to the virtual server page add the application name and port no....allow

Here is the link
*www.portforward.com/english/routers/port_forwarding/Huawei/Quidway-WA1003A/Quidway-WA1003Aindex.htm

Chose the app name,for which you need the port forwarding and follow the instruction
 
OP
src2206

src2206

In the zone
Hello dissel

Thank you for the link. But unfortunately I am still getting the same error massege. I would be grateful to you if you can help me out. I desperately need this issue to be resolved.

Please see the attached screen shot for details.

*img455.imageshack.us/img455/768/untitledkf8.jpg

I could not attach this file as the size exceeds forum's limit.

Please help me out :(
 
Last edited:
OP
src2206

src2206

In the zone
Hello everyone,

Thanks for your help. I have solved the problem, by changing the Router's Operating mode from BRIDGE to PPPoE.

But I have a new problem where I need advice.

As mentioned my connection type is 500 Home plan, with 2.5GB Data Transfer Limit per Month.
When I use my router in Bridge Mode, I have one dialing option, where I need to input the bsnl user name and password and then it connects to the internet. So after the connection I have two icons in my System Tray, one for LAN and the other of the connection.
This method of connection is preferable for me as I have a Data Transfer Limit.

As I changed my router to the PPPoE mode, I found out that the dialer became defunct and as soon as I turn on the Modem I get connected to the internet. Some thing like "always on unlimited connection". Though I would prefer to run my router in the PPPoE mode, I would not like to connect directly to the internet as soon as I power the router.

So is it possible to use my Router in the PPPoE mode but use a Dialing option instead of the getting connected directly? This is necessary for me to control the Data Transfer Limit. If possible then please tell me how.

Please help.

Thank you.
 
OP
src2206

src2206

In the zone
Thank you very much varunprabhakar

I shall try to find out in a while. If I shall be unsuccessful, will you please help me if I post the screen shot of the connection page of my router here?
 
OP
src2206

src2206

In the zone
Hello varunprabhakar

I am sorry but I could not find any Advanced option as you mentioned. :(

The following is the screen shot of the PPPoE connection page of my router.
Could you please check it out and help me please?

*img109.imageshack.us/img109/3092/pppoesetupwo7.jpg
 
Status
Not open for further replies.
Top Bottom