PO Cost...

S

sulursaro

Right off the assembly line
Hi Guys, Can sum one thro me some light for a PC for my requirement

1. What is the purpose of the computer? What all applications and games are you going to run?
Ans: Need to work on PLM softwares like Teamcenter and little bit of CAD application like NX8
Also I wud be runing VMware
2. What is your overall budget? If you can extend a bit for a more balanced configuration, then mention this too.
Ans: 30 K to 40 K

3. Planning to overclock?
Ans: NO

4. Which Operating System are you planning to use?
Ans: W7

5. How much hard drive space is needed?
Ans: 500to 640 GB i enough

6. Do you want to buy a monitor? If yes, please mention which screen size and resolution do you want. If you already have a monitor and want to reuse it, again mention the size and resolution of monitor you have.
Ans: NO. I have a Samsung SyncMaster 740N - 1280x1024. THe price above is with out a display

7. Which components you DON'T want to buy or which components you already have and plan on reusing?
Ans: Apart from display, nothing else

8. When are you planning to buy the system?
Ans: Yes

9. Have you ever built a desktop before or will this be done by an assembler?
Ans: Yes.

10. Where do you live? Are you buying locally? Are you open to buying stuff from online shops if you don't get locally?
Ans: I live in coimbatore

11. Anything else which you would like to say?
Ans:For Cad I need a display card.
 
P

panwala95

In the zone
i5 2500-13k
gigabyte ga b75m ds2-4.2k
4x2 gb corsair xms3-2.6k
corsair vs 450-2k
cm elite 430-2k
hd 6670 ddr3-5k
razer cyclosa keyboard mouse combo-2k
wd caviar blue 500gb-3.8k
asus dvd drive-1.2k
total-35.8k
 
A

akky89

Journeyman
panwala95 said:
i5 2500-13k
Click to expand...
finally got over g620 :p

@sulursaro
well panwala's build is great i5 2500 will help you in all of your needs and 8gigs of RAM
though one suggestion go for hd 6850 1GB GDDR5 around 9K
and build total will become 39.8K (which still be in your budget)
 
V

vkl

Cyborg Agent
@sulursaro

Config I
Intel i5 2400 - 10.8k
Intel DH67CL - 5.4k or Gigabyte B75M-D3H - 4.3k
Corsair Value ram(1333MHz)4GB*2 - 2.4k
Corsair VS450 - 2.2k
WD caviar blue 500GB - 3.8k
Asus DRW-24B5ST -1k
MSI R7770 - 8k
NZXT source 210 elite - 2.6k
Logitech MK200 -0.7k


Config II
Amd Fx 8150 - 12k
Gigabyte GA-970A-UD3 - 6.2k
GSkil RipJawsX 4GB*2 DDR3 1600MHz - 3.2k
Corsair VS450 - 2.2k or corsair cs430v2 - 2.5k
WD caviar blue 500GB - 3.8k
Asus DRW-24B5ST -1k
MSI R7770 - 8k
NZXT source 210 elite - 2.6k
Logitech MK200 -0.7k

If you are more into Virtualisation,run multiple VMs simultaneously or run intensive applications inside VM which requires more cores then fx8150's 8 cores would be handy and better.If you don't require that many core utilisation at a time then i5 2400 is better and faster.

For CAD a GCN based radeon card like HD 7770 is better.If you want then you can also go for a professional card which would give even better performance in CAD.
For professional cards firepro v4800 at 10k is a good option if you can find one.
 
P

panwala95

In the zone
akky89 said:
finally got over g620 :p

@sulursaro
well panwala's build is great i5 2500 will help you in all of your needs and 8gigs of RAM
though one suggestion go for hd 6850 1GB GDDR5 around 9K
and build total will become 39.8K (which still be in your budget)
Click to expand...

'fraid so
 
OP
S

sulursaro

Right off the assembly line
Thats a good response from all of you....

Thanks a lot VKL, Panwala95 & Akky89...

Have a great week end!!!
 
You must log in or register to reply here.
Top Bottom