nfs 7 dont run

Status
Not open for further replies.

ronit

Right off the assembly line
whenever i start nfs 7 hot pursuit2 on my system my monitor goes blank with cursor on it and then again it flickers and i get the following errors:


SSAssert - Assertion Failed

Assert:
X File:
Line: 0
Info: FILESYS_comleteop - OPERATION NOT FOUND IN COMPLETED LIST.

(Press Retry to debug the aplication)

Abort Retry Ignore

and another error in back


Need For Speed Hot Pursuit 2 (exception error)

(Hit Cntrl-C to copy this info to the clipbard)

The thread attempted to read from or write to a virtual addresss for which it does not have the appropriate access:

Version: 240
EIP = 0x0055E2E1
ESP = 0x00A9FAF8 EBP = 0X06307820
EAX = 0x00000000
EBX = 0x063077D0
ECX = 0x063074B4
EDX = 0x00000080
ESI = 0x06307480 EDI = 0x06307700

OK

Now

when i press abort button it closes the application i.e game

when i press Retry or Ignore button i get another error

Nfshp2

Nfshp2 has caused an error in NFSHP2.ORI. Close
! Nfshp2 will now close.

If you continue to experience problems,
try restarting your computer.

now pressing close button again closes application i.e. game.

I have tried to reinstall game many times. i have also restarted my computer many times. i have no antivirus installed on my computer. also my frien is running on 128 mb ram cerelon and mercury motherboard is running this game smoothly with all its effects to their maximum.

but this game runs on xp but very slowly even after decreasing every effect to minimun.

also plz tell me how to share my ram up to 128mb on my system, the details of my system is as follows:

Operating System Microsoft Windows ME
OS Service Pack -
Internet Explorer 5.50.4134.0100 (IE 5.5 - Windows Me)
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name MB (AMD2000PLUS)
User Name MB

Motherboard:
CPU Type AMD Athlon XP, 1266 MHz (12.5 x 101)
Motherboard Name Gigabyte GA-7VKMP(-P) (3 PCI, 1 AGP, 2 DIMM, Audio, Video, LAN)
Motherboard Chipset VIA VT8375 ProSavageDDR KM266
System Memory 96 MB (PC2100 DDR SDRAM)
BIOS Type AMI (04/02/03)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)

Display:
Video Adapter S3 Graphics ProSavageDDR (32 MB)
3D Accelerator S3 SuperSavageDDR
Monitor Samsung SyncMaster 501s/551s/551v/MagicSyncMaster CM151A [15" CRT] (HHAW905683)

Multimedia:
Audio Adapter VIA AC'97 Enhanced Audio Controller

Storage:
IDE Controller Primary IDE controller (dual fifo)
IDE Controller Secondary IDE controller (dual fifo)
IDE Controller VIA Bus Master PCI IDE Controller
SCSI/RAID Controller A347SCSI SCSI Controller
Floppy Drive GENERIC NEC FLOPPY DISK
Disk Drive GENERIC IDE DISK TYPE00
Optical Drive AXV CD/DVD-ROM (Virtual DVD-ROM)
Optical Drive HL-DT-ST CD-ROM GCR-8523B (52x CD-ROM)
Optical Drive HL-DT-ST CD-RW GCE-8526B (52x/32x/52x CD-RW)
SMART Hard Disks Status Unknown

Partitions:
C: (FAT32) 4098 MB (2425 MB free)
D: (FAT32) 5206 MB (1299 MB free)
E: (FAT32) 5206 MB (222 MB free)
F: (FAT32) 5206 MB (1214 MB free)
G: (FAT32) 12099 MB (6917 MB free)
H: (FAT32) 4865 MB (4419 MB free)
I: (FAT32) 34376 MB (7811 MB free)

Input:
Keyboard Standard 101/102-Key or Microsoft Natural Keyboard
Mouse Microsoft PS/2 Port Mouse

Network:
Network Adapter PPP Adapter.
Network Adapter Realtek 8139-series PCI NIC
Modem HSP56 Modem

Peripherals:
USB1 Controller VIA VT83C572 PCI-USB Controller
USB2 Controller VIA USB 2.0 Enhanced Host Controller

Problems & Suggestions:
Problem Disk free space is only 4% on drive E:.
 

krisjr

In the zone
well by the looks of it,ram is low,display isint gud..wat is fren using..mercury mobos,RAM? gfx card?
 

bharathbala2003

why need title?
ok m8 already a thread runnin on NFS HP2 probs here and m8 nfs 7 is UG.. and not HP2.. nfs 6 is HP2

u can see that thread.. that is TOTALLY SIMILAR :D
 
Status
Not open for further replies.
Top Bottom