Make ur dvd read by CD-ROM Drive

Status
Not open for further replies.

nvidia

-----ATi-----
:lol:
Its impossible. The only way to make it read a DVD is by upgrading your CD drive..
You can get a good DVD writer for around 1.3k now..
 

Ecko

Wandering In Tecno Land
*files.myopera.com/Tamil/Smilies/Secret.gif Ya I know the way
Ur get a DVD drive & scratch the logo written on it DVD Multi
Then say to all ur CD drive reads DVD :D*files.myopera.com/Tamil/Smilies/Cheers.gif
Bull$hit you wanna say that all techno ppl who upgrade are fools *files.myopera.com/Tamil/Smilies/Hit.gif
 

adi007

Youngling
It's easy..
Take a empty DVD and put in the drive it will surely read it as empty...see what a miracle..:)
 

skeletor

Super Moderator
Staff member
*files.myopera.com/Tamil/Smilies/Secret.gif Ya I know the way
Ur get a DVD drive & scratch the logo written on it DVD Multi
Then say to all ur CD drive reads DVD :D*files.myopera.com/Tamil/Smilies/Cheers.gif
Bull$hit you wanna say that all techno ppl who upgrade are fools *files.myopera.com/Tamil/Smilies/Hit.gif
Rofl.....:lol:
 
Last edited:

topgear

Super Moderator
Staff member
I Open this thread as i am going to find a best tut. but uh.. lol.

Same case here .:D

@ digit_technology2001
Why don't you buy a dvd writer instead of wasting your ( our also ) time. DVD writers are dirt cheap now.

even I had searched for this kind of thing oce.... All I found some worthless & misleading links.

It's a hardware limitation. CD drive can never read DVD.

Mods please close this thread.
 
simple.
take your cd-rom drive and drop it from the balcony.
go to a shop and buy a DVD-RAM drive for Rs. 1,150/-
put it in the computer.
label it as CD-ROM drive instead of DVD-RAM drive.
Voila! the *CD-ROM* drive is able to read DVDs.
 

DigitDonz

Broken In
It's never gonna b possible, both CD Drives and DVD reads in different technology in reading the disc; So I think you won't find a solution to do this
 

Sathish

Debian Gnu/Linux User
I think, this thread is created for such funny answers....

i have enjoyed with answers..... Good Entertainment.. for tea break..
 

pritish_kul2

★★★★★★★★★
There are two types of CD-ROM drives we can mod:
-24x to 40x
-40x or higher

Drives slower than 24x are too old to be modded.

24x to 40x CD ROMs

Laser Head Adjustments:
The track pitch of CDs is 1.6 microns, and the track pitch of DVDs is only 0.8 microns. The minimum length of track pits of CDs is .843mm, and the minimum length of track pits of DVDs is 0.293mm. That's why DVD discs can store much more data in the size of a CD.

Pinpointing this situation, we need to adjust the laser head so it can read discs with smaller track pitchs and shorter track pits. Open up the CD-ROM drive, do you see a lens on the rail? That's the laser head. On the side of the laser head, there's a screw you can adjust.

This is the key of this mod.

This screw can adjust the size of the laser beam that lands on the disc. Referring to the above, after adjusting, the laser beam should be less than 0.293mm, to suit the needs of DVD discs. So turn that screw 2-3 times. I got this number through trial and error. Mark with a pencil, in case you forget how many times you turned that screw.

Speed adjustments:
DVD-ROM drives can play DVD movies smoothly at 4x speed. If we're modding a 32x CD-ROM drive, the rotation speed is obviously too high, increasing heat, and shortening the life of the drive. So we need to decrease the speed of it.
Most people know that power supplies can provide 5V (red wire) and 12V (yellow wire) electricity output for Molex connectors. Find the Molex connector you'll plug into the modded CD-ROM drive, cut the yellow wire or insulate it with tape, so only 5V of electricity is transferred to the CD-ROM drive. The speed of the drive is now 32 * 5/17 = 9.41x and can now fulfill our requirements.

40x or higher CD ROMs

When 40x CD-ROM drives are released, most manufacturers are already producing DVD-ROM drives. To lower cost, they use the same core as DVD-ROM drives with DVD functions disabled. What we need to do here is to re-enable the DVD function.
Open up the CD-ROM, behind the circuit board, look for a jumper that says DVD JUMP. Find a jumper to connect this jumper. Thin metal wire also works fine.

OK, so the DVD function is unlocked, but we still need to decrease the speed. Use the instructions above on how to decrease the speed of the drive.

-Modded drives cannot be detected in POST, that means you cannot use it in DOS. But once you get into Windows, the drive works fine.
-Modded drives have no region code problems.
-Modded drives MIGHT NOT read DVD - 9 discs, that's why I said you can watch most retail DVDs in the beginning.

SOURCE - *blog.jayakanthan.net/2007/10/make-your-cd-rom-drive-to-dvdrom-drive.html
 

topgear

Super Moderator
Staff member
Lol. That hard to be true. Anything posted on the web doesn't mean it have to be or it is true.
If that's true why that guy had not posted any images.
I'm waiting for a tutorial to convert a plain dvd writer drive to read & write Blue ray & HD dvd's.
It's far enough . Mods please close this thread.
 

Subeejit

"Achtung Stuffen.."
I think, this thread is created for such funny answers....

i have enjoyed with answers..... Good Entertainment.. for tea break..

Ha Ha Ha Haaaaaaaaaaa.... Funny Question & Funnier Answers......A tension killer post...keep it up guys...ppl need not go to the park for a laughter therapy session....

And who knows all funny questions were laughed at in the begining and later proved to be serious inventions..so keep questioning how funny be it..one day you'll get your answer...

So I would like to leave a funnier question for answers..."Can the Solid State Disk used inthe HDD be reused as a stand-alone re-writable media in CD/DVD players..so that we can attain portability & mass storage aswell ?
 
Last edited:
Status
Not open for further replies.
Top Bottom