Is Nero Unreliable?

[mmalhotra]

This time I wrote 3 GB data on a DVD for I had to send it to my jijju in Ivory Coast. I wrote it and even verified it. I used Nero 7 for this purpose and used a Moser Baer DVD. But shockingly my sister told me the next day that the DVD shows 0 bytes data written on it and the free space is also 0 bytes. Can somebody help me out what is this going on?

 

[gxsaurav]

Don't worry, I guess the files are written. Tell her to download ISOBuster & using that she can extract all files. She don't need to buy ISOBuster. Free version will extract files fine.

 

[spikygv]

happened to me too . ask her to wipe the disc clean and re-insert it..

PS , ask her to try a disc that works and then wipe this disc and put it . This worked for me twice or thrice over the last 2 yrs...

 

[Akshay]

Rite. Wiping shud wrk. It dat doesnt den try data recovery s/w. or ISOBuster as saurav has mentioned.

Also dont 4get to ask ur sister to try it in odr drives.

 

[mmalhotra]

Don't worry, I guess the files are written. Tell her to download ISOBuster & using that she can extract all files. She don't need to buy ISOBuster. Free version will extract files fine.

Yes I tried it dear but it isnt working....

Don't worry, I guess the files are written. Tell her to download ISOBuster & using that she can extract all files. She don't need to buy ISOBuster. Free version will extract files fine.

ISOBuster shows it is blank..

 

[Akshay]

In dat case thr seems to b a prb wit her drive. Ask her to chk it on andr DVD drive

 

[mmalhotra]

Hey now I have a new problem, I have wasted more than five dvds trying to write data on them. Once it gave this error:

Writing short lead-out
I: SONY DVD RW DW-Q28A
Illegal Disc
I: SONY DVD RW DW-Q28A
Could not perform end of disc-at-once
Burn process failed at 16x(22,160KB/s)


Later it also gave power calibration error on one dvd.

Moreover, it is not reading CDs anymore.

 

[shantanu]

try writing at lower speeds.. i usually write at 8x or 12x.. and also try to update your drive's firmware

 

[Choto Cheeta]

Is Nero Unreliable?

Software is good enough (Though the newer versions will eat up a lot of RAM )

but max of the time problem comes with the midea we use, some time these cheap media's are not able to get burnt at higher speed !!

 

[mmalhotra]

Software is good enough (Though the newer versions will eat up a lot of RAM )

but max of the time problem comes with the midea we use, some time these cheap media's are not able to get burnt at higher speed !!

I used moserbaer dvds, but then why is it not reading the CDs which it used to read earlier.

 

[Vishal Gupta]

1. Try to burn at lower rate. It helps many times.
2. Try to upgrade the writer firmware. I hv also faced a similar problem in past with my Sony DVD writer, which was unable to write MoserBaer DVDs and after firmware upgrade it started.

 

[Help~Is~Here]

I used moserbaer dvds, but then why is it not reading the CDs which it used to read earlier.

There is certainly a problem with the drive. As suggested, try upgrading the firmware or reinstalling the drive.

 

[casanova]

Nero is great. Might be a fault with Moser Baer DVD.

 

[mmalhotra]

After upgrading the firmware when I tried writing a dvd in nero it failed giving this error

Write error SONY DVD RW DRU-800A/H0 T1
Writing short lead out

Burn process failed at 6x

After upgrading the firmware when I tried writing a dvd in nero it failed giving this error

Write error SONY DVD RW DRU-800A/H0 T1
Writing short lead out

Burn process failed at 6x

It is reading dvds though but isnt reading CDs!!

 

[ayush_chh]

try cleaning ur lens....