Help: No display on Monitor after turning ON.

[Jishnu]

Hai i am new to this FORUM but am a reglr reader of DIGIT.

When i turn ON my pc, the whole thing in the cabinet starts working BUT there is NO DISPLAY on monitor.

I came 2 know that the solution was 2 turn pc off, discharge all capacitors and turn it back on.Sometimes it works sometimes not.

But the problem still persists

Is it due to BAD ram or a failing PSU???

Specs:
Core2Duo E4500 2.2ghz
2 GB ddr2 ram Kingston
Intel D945GCNL
Asus 5750 Formula 1 GB
FRONTECH 450W PSU

 

[Zangetsu]

Is it due to BAD ram or a failing PSU???

yes u r right its RAM...
If PSU is faulty then either the fans wont work or frequent restarts

 

[Jishnu]

yes u r right its RAM...
If PSU is faulty then either the fans wont work or frequent restarts

But now i found out the culprit...

my gfx card's the one.

ma pc wrks smoothly when i pluggd my monitrs's cable 2 Intel intgrtd gfx output.

am vry dispntd i just bought mycard last Sept.

ANY SUGGESTIONS.....

 

[Zangetsu]

^^if the card is under warranty then send the card to RMA process