Help me to install GTX 650 Ti

N

noob

Cyborg Agent
Hi,
I have installed the graphics card however do i need to plug-in both white power cables ?
I have already done it but afraid to start the machine...

also should i remove the white sticker on top of card ? I hope it does not melt down :)

See the image for ref. And which software do you guy use to check temperature of GPU ?

*i.imgur.com/WK51VPr.jpg
 
Last edited:
Myth

Myth

Cyborg Agent
Its looks like the GPU requires only a single 6pin line. Check for a 6pin plug direct from the PSU. If none are available, use the setup as you have now.

Do not remove anything from the GPU !!!

Softwares to check GPU temp:
1. hwinfo64
2. hwmonitor
3. gpu-z
 
harshilsharma63

harshilsharma63

DIY FTW!
:bandanafighter:Cable management disaster detected. Buddy, you need some serious cable management and cleaning. I can see sand dues in the bottom of the case.
 
anirbandd

anirbandd

Conversation Architect
harshilsharma63 said:
:bandanafighter:Cable management disaster detected. Buddy, you need some serious cable management and cleaning. I can see sand dues in the bottom of the case.
Click to expand...

:lol:

@OP: you need to clean your case asap to prevent meltdown of whole system...




just joking :p whole system wotn meltdown but temps will be high ;)
 
OP
N

noob

Cyborg Agent
ok guys..can any one suggest a good air blower from eBay ?
I think one blow per month would take care of the dust.
 
rhitwick

rhitwick

Democracy is a myth
The card has a 6 pin input, and you somehow could not manage a single source for that. The present set-up is good to go and would not be any problem.
 
You must log in or register to reply here.
Top Bottom