Heat Is On! Give Your Readings!

[solomon_paulraj]

Guys.. give your thermal readings along with your specs in this thread.. Mine is..

Cabinet Temperature: 28c / 34c

P4 3.0Ghz CPU Temperature: 50c/60c

WD 250 SATA II Harddisk Temperature: 35c/40c

6600LE 256MB PCIe Graphics card: 50c/60c

Environment(the place where i live) Temp: 32 deg c (Average yearly)

 

[ranjan2001]

I am sure that I will top this list.

Location Delhi
present room ambient temp 35/40c

cabinet peace zebronics 500w PSU with big fan temp 38-45c

CPU c2d E6300 54/56c ideal ..............on load 63-67c

Seagate hdd 250 sata2 46/53c

xfx 7600GT GPU PCI-e 62/68c

 

[Ch@0s]

Location Bangalore
Present room ambients ~ 25-26C

Coolermaster Stacker 830, Watercooling

C2D E6600 @3.6GHz/1.41V

idle 42/44
loaded with apps 47/48
temps with TAT 55/56 (the max possible temps)

 

[assasin]

Location Durgapur
Room Temp - 30-33 C

C2D E4300 @ 3GHz/1.38v/Stock HSF

Idle - 27-30
load - 55-58

WD 160 GB 35/40

6600LE 256MB Pcie - 45-50

 

[Laser_dude]

Location Varanasi
Room temp 35-37 C

Celeron D 320 - 41-42 idle/47-48 full load with Stock Hsf

HDD Seagate 40 GB 33-36 C

 

[gauravakaasid]

Location - Kolkata
Room Temp - 29-32 c

amd 64 3000+ at 55ºC idle/ 66ºC on full load

seagate pata 120gig 52 ºC
seagate sata 120gig 50 ºC

are the temps too high? suggestions for keepin my rig cooler?

btw, am using SIW to take the temps

 

[deathvirus_me]

.. temps are infact cooler during summer with the AC ...

 

[gauravakaasid]

^^very funny

but seriously are they too high?

 

[assasin]

^^^ yeah the proccy temp seems to be a bit high.it sud be bet 30-40 at idle.
hdd temps sud be bout 35-40.
if ur cabby is small then get a bigger airy cabby,also fix some xtra fans...

 

[gauravakaasid]

ok..lets c....any cabby suggestions? n range?

 

[assasin]

u cud go for Zebronics Peace or Antibiotic cabbies.they'll set u back by 2.4-2.6k with psu.deduct 400 bucks from price if u dont want psu.

 

[deathvirus_me]

^^very funny

but seriously are they too high?

Dude i was talking about my case ... look at these temps ... i get these at idle ..

*img260.imageshack.us/img260/5365/untitledwl7.png

 

[ranjan2001]

Deathvirus,
what is your cabby & what is your ambient temp? I am using speedfan4.32 but your screen shows all fans, in my case it only shows CPU fan, my Peace cabby has 4 fans, how can I monitor that in speedfan
*img248.imageshack.us/img248/9270/0068li2.jpg

do we need to set some options somewhere in speed fan or mobo to show all the details. I doubt my mobo fan sensors are not working as they should.

 

[assasin]

^^^ speed fan will only show u the rpm of all fans that r connected to the mobo fan headers.it wont show the fans which r connected directly to psu.

 

[ranjan2001]

It means that my fan connector are not working, I had another cabinet where 4 fans were connected to the mobo but it was not showing any reading, I need to get that checked.

 

[Kniwor]

Location - Kolkata
Room Temp - 29-32 c

amd 64 3000+ at 55ºC idle/ 66ºC on full load

seagate pata 120gig 52 ºC
seagate sata 120gig 50 ºC

are the temps too high? suggestions for keepin my rig cooler?

btw, am using SIW to take the temps

Dude... u are killing your HDD's. I wouldn't be surprised if ur nothbridge is running hot too, u need to change your case or something.

just open the sidepanel and blow a fan toward the case, and let us know the temperatures then.

 

[assasin]

does enabling dual channel ram increase them proccy temp???
today i installed another ram stick and enabled dual channel ram.
slot 1:1GB ddr2 667 (5-5-5-15/4-4-4-12)
slot 2:1GB ddr2 533(5-4-4-12/4-4-4-12)

by default both ran @ 533 and wudnt oc,so i manually adjusted the timings to 5-5-5-12 and now both r running @ 667,proccy @ 3GHz and dram:fsb = 1:1.but the overall effect is that my proccy & mobo temp has increased by 2-3C.
any ideas why this is happening???
will this setup damage my mobo???

 

[freebird]

Room temp:31degrees
Processor p4 prescott 2.8Ghz temp=+40°C (low = -1°C, high = +127°C) sensor = diode
@ max =50
Motherboard Asus via chipset temp=+40°C (low = -1°C, high = +127°C) sensor = thermistor

seagate sata 80gb hdd : Temperature_Celsius 0x0022 049 053 000 Old_age Always - 49 degrees

 

[ranjan2001]

Assasin, when u OC u have to do it manually in the BIOS, & that does increase the temp too, enabling dual channel has no effect as per my knowledge in temp increase.

 

[assasin]

^^^ when i've only the 667 stick inserted den i dont hav to manually set the timings even after oc.but this prob is only with the 533 stick.its wont oc beyond 533 without manually setting the timings to 5-5-5-15.
so wat do u suggest i return the 533 module and get a 667 one?